— 8 —
SAT-HD100
1-4. A, G & TU BOARD REMOVAL
Note:
For board removal or replacement
,
detach all attached cables,
and leave them attached to an existing board.
1
Detach the connector between the A and G Boards.
2
Remove (2) screws (+BVTT 3 x 12) from G Board.
3
Remove (1) screw (+BVTP 3 x 8) from G Board. Gently lift
the board forward and up to remove.
4
Remove (1) screw (M3 x 6) from the back panel holding
in the tuning unit.
5
Remove (2) hex nuts from the cable jacks.
6
Remove (2) screws (+BVTP 3 x 8) from the back of the
unit, mounting the fan assembly. Lift the assembly up and
out to remove.
5
6
10
7
11
9
8
2
4
3
1
7
Remove (2) screws (M3 x 6) from the back of the unit,
mounting the RF Remote Assembly. Lift the assembly up and
out to remove.
8
Remove (2) screws (+BVTP 3 x 8) from the back of the unit
at the RCA jacks.
Remove (2) screws (+BVTT 3 x 12) mounting the TU Board
to chassis.
Remove (4) screws (+BVTT 3 x 12) mounting A Board to
Chassis. Gently lift the A and TU Boards simultaneously
forward and up to remove. Support the weight of both boards
at the connector.
Once removed from the chassis, disconnect the connector
shown to separate the A and TU Boards.
Содержание SAT-HD100
Страница 2: ... 2 SAT HD100 ...
