Sony S95E Скачать руководство пользователя страница 8

Страница: 8 / 69

S95E Sony

3. OSD operation

3.1 Generalization

Press the power button to turn the monitor on or off. The other control buttons are located

at front panel of the monitor. By changing these settings, the picture can be adjusted to

your personal preferences.

The power cord should be connected.

Connect the video cable from the monitor to the video card.

Press the power button to turn on the monitor, the power indicator will light up.

3.2 Key control

Power Switch:

When the Power button is pushed,

the status shall be changed into Power On within 2

seconds. Besides, Power Switch: the picture and the green LED shall be lit. When the Power button is

pushed again, the status shall be changed into Power Off within 1 second. Besides, the picture and the

green LED shall disappear.

Menu Button:

OSD window shall be displayed by pressing the “Menu” button in the Power On condition.

(Arrow) Button:

These buttons are used to select the menu items make adjustments.

OK Button:

This button activates the selected menu item and adjustments made using the Arrow buttons.

ECO Button:

This button is used to reduce the power consumption.

Main Power Switch:

This switch turns the monitor’s main power on and off.

The indication of LED:

Green — Normal On or Out of range.

Amber — Stand-By or Suspend.

Red — Power Off

Содержание S95E






































































Результаты поиска

Содержание S95E

Отзывы:

Похожие инструкции для S95E

Бренды по названию

Популярные бренды

Sony S95E, Руководство по обслуживанию

Результаты поиска

Содержание S95E

Отзывы:

Похожие инструкции для S95E

Бренды по названию

Популярные бренды