Sony S-Frame DPF-VR100, Руководство по эксплуатации

Страница: 29 / 44

29 GB
T
ry u
s
in
g
va
riou
s f
u
nc
tio
n
s
Operating an external device
connected to the photo frame
You can connect a mass-storage-compatible digital camera, USB
memory device, photo storage device, or other external device to the
photo frame and display an image directly from the external device.
1
Connect the AC power adaptor to the photo frame and
connect the AC power adaptor to an AC outlet.
2
Set the digital camera or external device to mass
storage connection mode.
(If you are using a Cyber-shot, set “USB Connect” to [Normal]
or [Mass Storage].)
3
Turn on the photo frame.
4
Connect the digital camera or external device to the
USB A connector on the photo frame.
5
Select the playback device.
External
memory or
other external
device
P Notes
• We cannot guarantee connection
with all types of external devices.
• The playback device will be
switched to the external device if
you connect the external device to
the USB A connector during
playback of the image in the
internal memory.
• When using a commercially
available USB cable, use an A-
Type USB cable that is less than 3
meters long.
• Use a USB cable with the USB
logo.
• Do not disconnect the USB cable
or turn the photo frame and
external device off while the
access lamp on the external device
is flashing. Doing so may damage
the data stored in the external
device. Sony assumes no
responsibility for any damage or
loss of data.
• A USB hub or USB device with a
built-in USB hub may not work
properly.
• The photo frame cannot use data
that has been encrypted or
compressed using, for instance,
fingerprint authentication or a
password.