Sony RMU-01, Руководство по эксплуатации

Страница: 23 / 26

23 Important Notes on Operation
Important Notes
on Operation
On Power Supply
• To supply power to this unit through the
LAN cable (Power over Ethernet), be
sure to use the power supply unit (PoE
hub or PoE power supply unit) that
conforms to IEEE802.3af standards.
For details on how to use the PoE hub and the
power supply unit, refer to the operation manual
supplied with the applicable device.
• When the power is supplied to this unit
from the supplied AC adapter and the
connected PoE power supply at the same
time, the power from the PoE power
supply takes priority.
On Installation
• When using multiple RMU-01 units,
install them so that they keep the distance
of 10 m (33 feet) or more from one
another. Also, keep the wireless LAN
access point that uses 2.4-GHz-band as
far as possible from this unit.
• Do not install this unit in the following
places:
- behind the interior material, such as
ceiling and wall
- near a window, electric appliance
(lighting equipment, electric motor,
elevator, electric switchboard, etc.)
- where the moving equipment may
knock over and damage this unit
• Do not touch the LAN connector directly
with your hand. If you do, electrostatic
discharge may damage the internal
components. To prevent this unit from
electrostatic damage, grounding the
supplied brackets, safety wire, etc., by
attaching them to metallic object is
recommended.
On Operation
• This unit does not work by itself. To
change the settings for the transmitters in
Sony digital wireless microphone system
(e.g., DWT-B01, DWT-P01, DWM-01),
connect this unit to the receiver that is
compatible with the NT remote system,
such as the DWR-R01D.
• In NT remote system operation,
transmitter settings can be changed from
the front panel of the receiver.
On Using and Storing
Environment
• This unit must be used within a
temperature range of 0 °C to 50 °C
(32 °F to 122 °F). (When the power is
supplied from the supplied AC adapter,
use this unit within the temperatures of
0 °C to 45 °C (32 °F to 113 °F).)
• Operating this unit near electrical
equipment (motors, transformers, or
dimmers) may cause it to be affected by
electromagnetic induction. Keep this unit
as far from such equipment as possible.
• The presence of the lighting equipment
may produce electrical interference over
the entire frequency range. Position this
unit so that interference is minimized.
On Cleaning
• If this unit is used in a very humid or
dusty place or in a place subject to an
active gas, clean its surface as well as the
connectors with a dry, soft cloth soon
after use. Lengthy use of this unit in such
places or not cleaning it after its use in
such places may shorten its life.