Sony RM-B750, Руководство пользователя

Страница: 17 / 94

1-9 (E)
RM-B750
1-9-2. Installing the WHITE Knob Assembly
n
The two WHITE knob assemblies can be replace in the
same way.
1. Rotate the shaft of the WHITE knob fully and stop
rotation at the position that generates the clicking
sound.
2. Install the WHITE knob assembly while aligning the
white mark of it with the corresponding mark of the
operation panel.
WHITE knob assemblies
Mark on the
operation panel
White mark
Shaft of the WHITE knob
1-9. Installing the IRIS Knob Assembly and WHITE Knob Assembly
1-10. Note on Service
1-10. Note on Service
1-10-1. Information of the Software Version
There are the following Camcorder models to which this
unit can be connected:
Model Software File writing to
Memory Stick
in this unit
HDW-700/700A series Ver.1.00 or later No
HDW-F900 series Ver.1.00 or later Yes
HDW-750/730 series Ver.1.50 or later No
*
MSW-900 series Ver.1.60 or later No
*
DVW-707/709WS/ Ver.1.19 or later No
790WS series
No
*
: Data writing to the memory stick in the camera is possible.
1-10-2. Description on Backup Battery
w
The lithium battery is a critical part to safe operation.
Replace the component with Sony part whose part number
is listed in the manual published by Sony.
If the component is replaced by any part other than the
specified ones, this may cause a fire or electric shock.
c
When replacing the lithium battery, ensure that the battery
is installed with
+ and _ poles connected to the correct
terminals. An incorrect connection may cause an explosion
or leakage of fluid as a result, physical damage in the
surrounding materials may be caused.
A lithium battery on the MPU-124 board is used to back up
the date data to be stored in the memory stick. Reset the
date data using he RM configuration menu is the Maintenance
menu (Refer to the operation manual “Initial Settings”.)
after replacing the MPU-124 board or the dead battery.
Replacement part : BT1 (MPU-124 board)
DescriptiWon : CR-2032 (Lithium battery)
Parts number : ! 1-528-174-31
Recommended replacement period : Every 7 years
m
.
When replacing the MPU-124 board, it is recommended
to replace the battery at the same time.
.
Resetting the date data is required also when the battery
is removed from the battery holder.