Sony RM-1000BP, Руководство по эксплуатации

Страница: 26 / 96

-GB
Notes on Use
This unit cannot perform two or more remote-control operations at the same time with the
system. Operate one at a time.
When the video camera is set to auto-adjust recording, some control keys of the video
camera cannot be operated by this unit.
Check the result of the operation with this unit on the LCD screen of the video camera or
monitor output screen etc.
This unit can change the video camera’s setting even if they have been set by changing the
position of the switch on the video camera.
When disconnecting the cable or the power of the video camera is cycled, the video camera
settings will change to those of the switch position on the video camera.
Example of the appropriate switch:
Slide switch, lever switch etc. (H/M/L of GAIN, PRESET/A/B of WHT BAL etc.)
The control keys on this unit operate in almost the same way as the corresponding control
keys on the video camera.
(Operation with the FOCUS/IRIS dial and ZOOM lever on this unit and operation with the
FOCUS/IRIS dial and ZOOM lever on the video camera are very similar but not exactly the
same.)
For details on the operation settings, refer to the operating instructions provided with your
video camera.
Features
The RM-1000BP is a Remote Commander for making images by video engineers.
This unit can be connected to the video camera using the LANC terminal with the
accessory cable. (For details, see p. 7.)
Using this unit enables the remote operation of the MENU key and other control keys on
the video camera.
This unit makes operations smooth because of the arrangement of the IRIS dial, the
FOCUS dial and ZOOM lever.
By using the ZOOM DIRECTION switch and ZOOM SPEED switch, this unit can operate
the wide variations of zoom operation with the ZOOM lever.









