Sony RDR-GXD310, Руководство по эксплуатации

Страница: 88 / 108

88
Additional Information
Troubleshooting
If you experience any of the following difficulties
while using the recorder, use this troubleshooting
guide to help remedy the problem before
requesting repairs. Should any problem persist,
contact the Sony Customer Information Centre on
08705 111 999
(Monday-Friday from 8:30am to 6:00pm)
The power does not turn on.
, Check that the mains lead is connected securely.
The channel is not found or stored or missed.
,
Make sure that your aerial is properly connected
to the recorder.
,
Confirm with your dealer that you are in an area
that can receive a digital signal.
,
Check your aerial installation.
There is no picture.
,
Re-connect all connecting cords securely.
, The connecting cords are damaged.
, Check the connection to your TV (page 13).
,
Switch the input selector on your TV (such as to
“VCR”) so that the signal from the recorder
appears on the TV screen.
,
Check that “Scart Setting” in “Video” setup is set
to the appropriate item that conforms to your
system (page 80).
,
If you connect the recorder to your TV via only
the COMPONENT VIDEO OUT jacks, set
“Component Out” in “Video” setup to “On”
(page 79).
, This recorder cannot record NTSC signals.
, A scrambled channel is selected.
,
When playing a double-layer DVD, the video
and audio may be momentarily interrupted at the
point where the layers switch.
Picture noise appears.
,
If the picture output signal from your recorder
passes through your VCR to get to your TV, or if
you are connected to a combination TV/VIDEO
player, the copy-protection signal applied to
some DVD programmes could affect picture
quality. If you still experience this problem even
when you connect your recorder directly to your
TV, try connecting your recorder to your TV’s S
VIDEO input.
,
You have set the recorder to progressive format
(the PROGRESSIVE indicator lights up) even
though your TV cannot accept the progressive
signal. In this case, press PROGRESSIVE until
the PROGRESSIVE indicator turns off.
,
Even if your TV is compatible with progressive
format (525p/625p) signals, the image may be
affected when you set the recorder to progressive
format. In this case, press PROGRESSIVE so
that the PROGRESSIVE indicator turns off and
the recorder is set to normal (interlace) format.
,
You are playing a DVD recorded in a colour
system that is different from your TV.
,
When playing a double-layer DVD, the video
and audio may be momentarily interrupted at the
point where the layers switch.
TV programme reception does not fill the
screen.
,
Select the correct source using the INPUT
SELECT button, or select a channel of any TV
programme using the PROG +/– buttons.
Picture break up
, Signal strength low.
, Check aerial installation.
TV programme pictures are distorted.
, Reorient or upgrade the TV aerial.
, Adjust the picture (see the TV’s instruction
manual).
, Place the recorder and TV farther apart.
, Place the TV and any bunched aerial cables
farther apart.
, The RF cable is connected to the AERIAL OUT
jack on the recorder. Connect the cable to the
AERIAL IN jack.
TV channels cannot be changed.
,
The channel is hidden (page 77).
,
A timer recording started, which changed the
channels.
,
The Parental Lock is activated (page 75).
Power
Tuner
Picture