Sony RDR-GX315 Скачать руководство пользователя страница 12

Страница: 12 / 78

1-2

TOOLS

The TOOLS menu appears when you press
TOOLS. You can search for a title/chapter/track,
check the playing and remaining time, or change
audio and repeat settings. The displayed options
differ depending on the media type.
Press

to select an option, press

select the desired item, and press ENTER.

Example: When you press TOOLS while a
DVD-RW (VR mode) is playing.

Selectable options

Selectable options on the System Menu differ
depending on the media type, disc condition, and
operating status.

Example: When a disc is stopped.

* Unfinalized disc only

To return to the previous display

Press

RETURN.

Note

The System Menu does not appear when recording on a
DVD.

1/4

1/1

00:00:25

Title

Chapter

Time

Repeat

Remain

Audio

Off

00:01:30

ENG Dolby 5.1ch (1/3)

Type

Selectable option

-RWVR

-RW

Video

DVD

VCD

DATA CD

DATA DVD

Hookups and Settings

Hooking Up the Recorder

Follow steps 1 to 7 to hook up and adjust the
settings of the recorder.

Notes

• Plug cords securely to prevent unwanted noise.
• See the instructions supplied with the components to be

connected.

• You cannot connect this recorder to a TV that does not

have a video input jack.

• Be sure to disconnect the power cord of each

component before connecting.

Step 1: Unpacking

Check that you have the following items:
• Audio/video cord

(phono plug

phono plug

3) (1)

• Antenna cable (1)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)

Step 2: Connecting the
Antenna Cable

Select one of the following antenna hookups. Do
not connect the power cord until you reach
“Connecting the Power Cord” on page 19.

Note to CATV system installer (in USA)

This reminder is provided to call the CATV
system installer’s attention to Article 820- 40 of
the NEC that provides guidelines for proper
grounding and, in particular, specifies that the
cable ground shall be connected to the grounding
system of the building, as close to the point of
cable entry as practical.

Notes

• If your antenna is a flat cable (300-ohm twin lead

cable), use an external antenna connector (not
supplied) to connect the antenna to the recorder.

• If you have separate cables for VHF and UHF

antennas, use a UHF/VHF band mixer (not supplied) to
connect the antenna to the recorder.

If you have

Hookup

Cable box or satellite receiver with a
video/audio output

A (page 13)

Cable box with an antenna output
only

B (page 14)

Cable without cable box, or antenna
only (no cable TV)

C (page 14)

Hookups

and Settings

A: Cable box or satellite receiver with a video/audio output

With this hookup, you can record any channel on the cable box or satellite receiver. Be sure that the
satellite receiver or cable box is turned on.
To watch cable or satellite programs, you need to match the channel on the recorder (L1) to the input jack
connected to the cable box or satellite receiver (LINE 1 IN).

DVD recorder

Audio/video cord
(supplied)

: Signal flow

Cable box/satellite receiver

Wall

continued

B: Cable box with an antenna output only

With this hookup, you can record any channel on the satellite receiver or cable box. Be sure that the
satellite receiver or cable box is turned on.
To watch cable programs, you need to match the channel on the recorder (2ch, 3ch or 4ch) to the antenna
output channel on the cable box (2ch, 3ch or 4ch).

C: Cable without cable box, or antenna only (no cable TV)

Use this hookup if you watch cable channels without a cable box. Also use this hookup if you are using
a VHF/UHF antenna or separate VHF and UHF antennas.
With this hookup, you can record any channel by selecting the channel on the recorder.

ANT IN

TO TV

to VHF/UHF IN

Wall

DVD recorder

Antenna cable (supplied)

: Signal flow

Cable box

DVD recorder

to VHF/UHF IN

: Signal flow

Wall