Sony QUALIA 002, Руководство пользователя

Страница: 64 / 124

Using the Menu
64
b
Note
• The SteadyShot function does not work well when a wide conversion lens other than VCL-
HG0872 (optional) is attached to your camcorder.
• When using VCL-HG0872, select [WIDE CONV.] in [STDYSHOT TYP] below.
STDYSHOT TYP
You can select the type of the SteadyShot function that compensates for camera-
shake. To release the SteadyShot function, select [OFF] in [STEADYSHOT] or
use the ASSIGN button assigned to the SteadyShot function (p. 80).
AF ASSIST
FLCKR REDUCE
b
Note
• Flickering may not be reduced depending on the light source.
HANDLE ZOOM
Select this item to set the zoom speed of position H and L of the handle zoom
switch (p. 32).
1
Select [H] or [L] by turning the SEL/PUSH EXEC dial, then press the
dial.
2
Select a zoom speed by turning the SEL/PUSH EXEC dial, then press the
dial.
Speeds 1 through 8 are available. The larger the number, the faster the zoom
speed.
3
Select [OK] by turning the SEL/PUSH EXEC dial, then press the dial.
HARD Select to activate the SteadyShot function with stronger effect. This
mode is not recommended for recording with camera panning
technique.
G
STANDARD Select to activate the standard SteadyShot function.
SOFT Select to activate the SteadyShot function so that it leaves a slight
unsteadiness on the picture so the picture looks natural.
WIDE CONV.
Select when a wide conversion lens (optional) is attached. This mode
is the most effective with Sony VCL-HG0872 wide conversion lens.
G
OFF Select to record in the standard recording mode.
ON
Select to focus manually by rotating the focus ring during auto
focusing.
G ON
Select to record under normal conditions. Flickering of the screen
under a light source such as fluorescent lamps will be reduced.
OFF
Select when you do not want to reduce flickering of the screen.