000
1. Overview: Screen Display
17
22.
Network client mode indicator
Displays the status of the connection to the CCM
(PWS-100RX1 Network RX Station configured as
Connection Control Manager) using icons when
network client mode is on.
State
Icon
Operation
>Display
On/Off >NW
Client Mode
Status
Maintenance
>Network
Client Mode
>Setting
State
Off
—
—
—
On
Off
—
—
On
CCM
connected
Connecting to
CCM
(disconnected) (flashing)
CCM
connection
standby
–
CCM
connection
error
For details
about errors,
see
(page 13).
23.
Video signal indicator
Displays the video signal in realtime as a
waveform, vectorscope, or histogram.
24.
Recording media state/remaining capacity
indicator for each media slot
Displays the state and remaining capacity of the
media in SxS slot A, SxS slot B, and the PROXY SD
card slot.
SxS slot icon indicator
* SxS slot A (SxSA) example. The icons for SxS slot B are
labeled SxSB.
Icon
Media state
–
Media not inserted or not mounted
Media mounted
Icon
Media state
(flashing)
Media mounting
(orange bar)
Recording (active)
(green
indicator)
Playback (active)
(orange bar
+ green
indicator)
Recording/playback (active)
SD card (for proxy data recording) icon indicator
Icon
Media state
–
Media not inserted or not mounted
Media mounted
(flashing)
Media mounting
(orange bar)
Recording (active)
The remaining recording time is displayed
numerically.
25.
Audio level meter indicators
Displays the levels of audio channels 1 and 2.
26.
Clip name display
Displays the name of the clip currently recording
when recording, or displays the name of the next
clip to be recorded during recording standby.
27.
Focus assist indicator
Displays a detection frame (focus area marker)
indicating the area for detection of degree of
focus, and a level bar (focus assist indicator)
indicating the degree of focus within that area.
28.
Time data display
Displays the remaining recording/playback
time, timecode, user bits, etc., as selected by the
29.
SD card indicator for saving configuration
data
Displays the state of the SD card (for saving
configuration data) inserted in the UTILITY SD card
slot.
Icon
Media state
—
SD card not inserted or not mounted
SD card mounted
Mounted SD card is protected
(flashing)
SD card mounting
30.
SDI output REC trigger indicator
Displays the superimposition state of the recording
command sent to the SDI connector output.
It is displayed when Maintenance >Camera Config
>HD SDI Remote I/F is set to “Characters” in the
setup menu.
31.
ALAC indicator
Displays “ALAC” when the ALAC (Auto Lens
Aberration Correction) function is set to be
performed automatically.
ALAC will be performed automatically when
an ALAC-compatible lens is attached, the ALAC
function is enabled, and Maintenance >Camera
Config >ALAC is set to “Auto” in the setup menu.
32.
AE (auto iris) mode indicator
Displays the current operating mode of the auto
iris function using an icon and auto iris override
level.
Icon
Meaning
Backlight mode
Standard mode
Spotlight mode
33.
Auto focus mode indicator
Displayed when an auto focus lens is attached (not
supported in this version).
34.
ND filter indicator
Displays the position number of the currently
selected ND filter (page 5).
When “Electrical CC” is assigned to an assignable
switch, the position (A/B/C/D) of the electrical
CC filter is displayed on the right of the ND filter
indicator (1 to 4).
35.
Gain indicator
Displays the gain setting (dB), set using the GAIN
switch, of the video amplifier.
36.
Shutter mode/shutter speed indicator
Displays the shutter mode or shutter speed.
“Setting the Electronic Shutter” (page 37)
37.
White balance mode indicator
Displays the currently selected white balance
automatic adjustment memory.
ATW: ATW (Auto Tracing White Balance) mode
W:A: Memory A mode
W:B: Memory B mode
W:C: Memory C mode
W:P: Preset mode
3200K: Appears when an assignable switch
assigned with Color Temp SW 3200K is on
4300K: Appears when an assignable switch
assigned with Color Temp SW 4300K is on
5600K: Appears when an assignable switch
assigned with Color Temp SW 5600K is on
6300K: Appears when an assignable switch
assigned with Color Temp SW 6300K is on
