Sony PWS-4500, Руководство по эксплуатации

Страница: 20 / 63

20
System Screen
C
h
ap
te
r 4
W
e
b
M
enu
Rec Inhibit
Sets record inhibit mode.
• Off: Enables recording
• On: Disables recording
Frame PB Mode
Selects the playback mode during variable speed playback.
• Field: Field playback
• Frame: Frame playback
Freeze PB Mode
Specifies the freeze mode and freeze timing for manual
freeze (freeze control using the front panel, REMOTE 1 to
8 connectors, and GPIO (25-pin) connector) and auto
freeze.
• Field 1: Freezes the 1st (odd) field.
• Field 2: Freezes the 2nd (even) field.
• Frame: Freezes in frame mode.
Record File Naming
Selects the file naming convention for automatically
generated files.
• FILE + Sequential: Assigns a sequential number.
• Time: Uses the recorded time as the file name.
• User Specified Name: Allows the user to specify a 4-
character prefix for the file name.
File Delete Mode
Selects whether to delete a file if the Delete command is
received for a file for which playback or file transfer
(export) is in progress.
• Inhibit: Prevents deletion of files during playback or file
transfer.
• Permit: For a file during playback, it deletes the file
when the port closes. For a file during file transfer, it
stops the transfer and then deletes the file.
Front LED Mode
Selects whether the front panel indicators are enabled/
disabled.
• Off: Indicators are always off.
• On: Indicators are enabled to indicate the status of the
unit.
QFHD/4K SDI with TC
Selects whether to superimpose the time code on the
output from the SDI 1 connector only or on all SDI signals,
if QFHD or 4K is specified as the video format.
• SDI-1 Only
• All SDI
Time Shifted Play
Selects, when using chasing playback, whether to play
back video stored in a buffer for playback with the shortest
delay, or to play back video that is recorded in storage.
• Shortest Delay
• From Storage Only
Output Port SDI-1, 2, 3, 4
When using each port as an output port, this selects
whether to output the signal from the SDI 1 to 4
connectors. When set to Off, signals are output from the
SDI 5 to 8 connectors only.
• Off
• On
No Video Output Signal
Selects the display color or the main output and monitor
output if there is no input signal on the input port or
nothing is playing on the output port.
• Gray
• Dark Gray
• White
• Black
Control Inhibit
When enabled, this prevents all changes to the
configuration using the web menu.
Automatic Start
When enabled, the unit turns on automatically when power
is connected using the power cord.
Master Audio
When the input port of a master audio signal is specified,
the audio signal input on that port can be recorded on all
input ports.
Set whether to record the master audio or the audio signal
that is input on each port for each port using [Audio
Source] on the Port screen.
Master TC
Makes master time code settings.
The master time code can be used as common time code
generator for each input port.
TCG Source
Selects the source signal for synchronizing the internal
time code generator. You can select a signal input on ports
A to D.
• Internal-Preset
• External-LTC: A
• External-LTC: B
• External-LTC: C
• External-LTC: D
REGENE Source
Selects the signal to regenerate when the time code
generator is in regenerate mode or in automatic editing
mode.
• TC&UB: Regenerates both the time code signal and user
bit signal.
• TC Only: Regenerates the time code signal only.
• UB Only: Regenerates the user bit signal only.