©2012 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features and specifications are subject to change without notice.
Screen images are simulated.
The values for weight and dimension are approximate.
Sony, TRIMASTER EL, XDCAM, XDCAN-EX, NXCAM,
and the Sony make.believe logo are trademarks of Sony.
HDMI is a trademark of HDMI Licensing, LLC.
All other trademarks are the properties of their respective owners.
The PVM-741 is produced under control
of the Sony EMCS Corporation, which
has received ISO14001 Environmental
Management System certification.
PVM-741
Picture Performance
Panel
OLED panel
Picture size (diagonal)
7 1/2 inches
188.0 mm
Effective picture size (H x V)
6 1/2 x 3 5/8 inches
163.9 x 92.2 mm
Resolution (H x V)
960 x 540 pixels (QHD)
Aspect
16:9
Panel drive
RGB 10-bit
Viewing angle (panel specification)
89°/89°/89°/89° (typical)
(up/down/left/right contrast > 10:1)
Input
Composite
BNC (x1), 1.0 Vp-p ±3 dB sync negative
SDI
BNC (x2)
HDMI
HDMI (x1) (HDCP correspondence)
Audio
Stereo mini jack (x1), -5 dBu 47 kilohms or higher
Parallel remote
Modular connector 8-pin (x1) (pin-assignable)
Serial remote (LAN)
RJ-45 modular connector (Ethernet) (x1)
(10BASE-T/100BASE-TX)
DC IN connector
XLR-type 4-pin (male) (x1), 12 V DC (output
impedance 0.05 ohms or less)
Output
Composite
BNC (x1), loop-through,
with 75 ohms automatic termination
SDI
BNC (x1),
output signal amplitude: 800 mVp-p ±10%,
output impedance: 75 ohms unbalanced
Audio monitor out
Stereo mini jack (x1)
Speaker (Built-in)
0.5 W (mono)
Headphones output
Stereo mini jack (x1)
General
Power requirement
AC 100 V to 240 V, 50/60 Hz,
0.5 A to 0.3 A, DC 12 V, 1.9 A
Power consumption
Approx. 30 W (max.)
Operating temperature
32°F to 104°F (0°C to 40°C)
Recommended: 68°F to 86°F (20°C to 30°C)
Operating humidity
30% to 85% (no condensation)
Storage and transport temperature
-4°F to +140°F (-20°C to +60°C)
Storage and transport humidity
0% to 90%
Operating, storage, and transport pressure
700 hPa to 1060 hPa
Dimensions (W x H x D)
(with stand)
8 7/8 x 7 1/4 x 6 3/8 inches
222.4 x 183.5 x 161.8 mm
(when AC adaptor is attached)
Dimensions (W x H x D)
(without stand)
8 7/8 x 6 5/8 x 2 7/8 inches
222.4 x 166 x 70 mm
(when AC adaptor is detached)
Weight
4 lb 6 oz
2.0 kg
5 lb 12 oz
2.6 kg
(When AC adaptor is installed)
Supplied accessories
AC power cord (1), AC plug holder (1),
AC adaptor (1), Handle (1), Arm mount bracket
(1), Screws (4), Operating Instructions (1),
CD-ROM (1), Using the CD-ROM manual (1)
8
7
/
8
(222.4)
7
1
/
4
(183.5
)
6
5
/
8
(166
)
23
/
32
(17.5
)
5
7
/
8
(148.8)
6
3
/
8
(161.8)
17
/
32
(13)
6
3
/
8
(161.5)
21
/
32
(16)
5
1
/
8
(130)
6 (149.6)
1
/
4
(5.6
)
2
7
/
8
(70)
2
3
/
8
(60)
Front
Side
Bottom
(Without the stand)
Top
(With the arm mount bracket)
2
1
/
4
(55.2
)
1
5
/
16
(33.2
)
2
1
/
4
(55.2
)
1 (25)
3/8-16UNC Maximum depth
1/4 inch (6 mm)
3/8-16UNC
Maximum depth
1/4 inch (6 mm)
1/4-20UNC
Maximum depth
1/4 inch (6 mm)
1/4-20UNC Maximum depth
1/4 inch (6mm)
4-M3
Maximum depth
1/4 inch (6 mm)
6
7
/
8
(173.6)
21
/
32
(16)
Specifications
Optional Accessories
MB-531
Mounting Bracket
VF-510
ENG Kit (Viewing Hood,
Carrying Handle and
Connector Protector)
MB-532
Mounting Panel
Dimensions
Units: inches (mm)
LCPVM02KH
Portabrace Monitor Soft Case
(for LMD-940W/ PVM-740)
QR-A200
Anton Bauer Gold Mount
Battery Plate Mounts
onto Sony editing decks
DNW-A25/A220/A225/DS70
and Sony field monitors. The
adapter can also be used to
power Sony DSR50 VTR and
BVM-D9 HD monitor
Printed in USA (10/12)
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
sony.com/oled
DI-0284 (MK10681V2)
Probekit2
X-Rite i1PRO Light Probe
(for monitors: BVM-E170, BVM-E250,
BVM-F250, BVM-F170, PVM-L3200,
PVM-740, LMD-1541W, LMD-2341W,
LMD-940W, LMD-1751, LMD-2451,
LMD-2451TD, LMD-4251TD)
