Sony PS4 CUH-1106A A, Руководство по безопасности

Страница: 9 / 56

9
EN
CUH-2006B 4-597-560- 21 (1) EN /CT/CS
• You are responsible for Internet service fees. For details,
refer to the information provided in your service contract
or contact your Internet service provider.
• Do not use a cord for a standard residential telephone line
or cables of types other than those mentioned here. Using
the wrong type of cord or cable can cause more electrical
current than necessary to flow through the LAN connector,
which may lead to heat build-up, fire or malfunction.
Wireless networking feature
• The 2.4 GHz range of radio waves used by the wireless
networking feature of this product is a range shared by
various devices. This product has been designed to
minimize the effect of other devices using the same range.
However, in some cases interference from other devices
may reduce the connection speed, shorten the signal
range or cause the connection to be terminated
unexpectedly.
• When using the PS4™ system's scan function to select a
wireless LAN access point, access points that are not
intended for public use may be displayed. Only connect to
an access point that you are authorized to use.
Moisture condensation
If the system or disc is brought directly from a cold location
to a warm one, moisture may condense either on the lens
inside the system or on the disc. Should this occur, the
system may not operate properly. In this case, remove the
disc and turn off and unplug the system. Do not put the disc
back in until the moisture evaporates from the system (this
may take several hours). If the system still does not operate
properly, contact Customer Service Hotline (
back cover).
Cleaning
For safety reasons, before cleaning the system or connected
accessories, disconnect the AC power cord from the electrical
outlet.
Exterior surfaces (plastic cover of system, Wireless
Controller and PlayStation®Camera)
Follow the instructions below to help prevent the product
exterior from deteriorating or becoming discolored.
• Wipe with a soft, dry cloth.
• Do not apply insecticides or other volatile substances.
• Do not place any rubber or vinyl materials on the product
exterior for an extended period of time.
• Do not use solvents or other chemicals. Do not wipe with a
chemically-treated cleaning cloth.
Vents
When dust accumulates in the system vents, remove the
dust with a low-powered vacuum cleaner.
Connectors
Do not use when the connectors of the system or the AC
power cord are not clean. If used when dirty, the flow of
electrical current may be obstructed. Remove the dirt with a
dry cloth.
Headset or headphones
If the connector on the headset or headphones becomes
dirty, you may experience noise or interruptions in sound.
Wipe the connectors with a dry, soft cloth to keep in clean
condition.