Sony Power HADFX HDC-P1, Руководство по обслуживанию

Страница: 39 / 238

2-3 (E)
HDC-P1
2-2. Replacing CCD Unit Boards
2-2-1. DR-632P Board
1. Remove the side panel (L) assembly and the
side panel (R) assembly.
(Refer to Section 1-5.)
2. Remove the CCD unit. (Refer to Section 2-1.)
3. Remove the TG-265PT board.
(Refer to Section 2-2-4.)
4. Disconnect the fl exible card wires from the
connectors (CN1, CN2, CN3, CN4) on the
DR-632P board.
n
Be careful not to bend the fl exible card wire.
This shortens the wire life.
5. Remove the three screws to remove the
DR-632P board.
6. Install a new DR-632P board by reversing the
steps above.
2-2-2. NR-80P Board
1. Remove the side panel (L) assembly and the
side panel (R) assembly.
(Refer to Section 1-5.)
2. Remove the CCD unit. (Refer to Section 2-1.)
3. Disconnect the fl exible card wires from the
connectors (CN1, CN2) on the NR-80P board.
4. Remove the three screws to remove the
NR-80P board.
5. Install a new NR-80P board by reversing the
steps above.
PSW2
x
5
CN3
CN1
CN2
CN4
DR-632P board
PSW2
x
5
CN3
CN1
CN2
CN4
DR-632P board
CN2
CN1
NR-80P board
PSW 2
x
5
CN2
CN1
NR-80P board
PSW 2
x
5