Sony Power HAD DXC-D30F, Руководство по эксплуатации

Страница: 9 / 92

Chapter 1 Overview
Chapter 1 Overview
9
Dockable with various types of VTRs
The DXC-D30/D30P docks with the DSR-1/1P
DVCAM VTR to configure the DSR-130/130P digital
camcorder. It also docks with the PVV-3/3P Betacam
SP VTR to configure the PVW-D30/D30P Betacam SP
camcorder. In addition, the DXC-D30/D30P docks
with the EVV-9000/9000P Hi-8 VTR. Using an
adaptor (not supplied), it is also able to dock with a
variety of existing S-VHS VTRs.
New Functions boost operability
EZ (easy) mode function
When there isn’t time to check the camera head
settings, simply press the EZ mode button to start the
auto adjustment function using standard settings.
There is no need to lose a shot for lack of setup time.
EZ (easy) focus
Press the EZ focus button before shooting to ensure a
quick and accurate focus.
Programmable gain
The amount of gain relative to the GAIN switch setting
(H, M, or L) can be programmed as –3 dB, 0 dB, 3
dB, 6 dB, 9 dB, 12 dB, 18 dB, 18 dB+DPR
1) , 24 dB,
24 dB+DPR and hyper gain.
Hyper gain
Hyper gain (36 dB, or about 60 times greater than
0 dB) can be easily set via one switch setting. This can
also be done from remote equipment.
Auto tracing white balance
This function automatically traces the white balance,
which constantly changes as lighting conditions
change. Auto tracing white balance is especially
useful when there is no time to manually adjust the
white balance or when shooting moves between indoor
and outdoor locations.
Intensified auto iris control
In addition to the standard auto iris, the intelligent auto
iris function adjusts the lens iris to compensate back
lighting or spot lighting.
Total level control system (TLCS)
Even if the incoming light exceeds the range in which
the standard auto iris can control exposure, the auto
gain control (AGC) or auto exposure (AE) backs up to
ensure proper exposure.
Dual pixel readout (DPR)
When the gain is set to either 18 dB or 24 dB, the gain
setting can be doubled (6 dB up) without increasing
the noise level.
Recording time display
Recording time can be displayed in either of the
following modes.
• Total recording time for all cuts
• Total recording time for current cut
Viewfinder super detail
Video signals for the viewfinder are mixed with V-
DTL signals to make focusing easier.
Dual zebra pattern display
Two types of zebra patterns, zebra 1 and zebra 2 can
be displayed simultaneously or independently. The
zebra 1 can be set to the levels ranging from 70 to 90
IRE on the DXC-D30 (or from 70 to 90% on the DXC-
D30P) and the zebra 2 indicates the levels of 100 IRE
for the DXC-D30 or more (or the levels of 100% or
more for the DXC-D30P).
Color temperature display
When reading the white balance, the color temperature
is displayed on the viewfinder screen.
Video monitor output with text
The video signal with text superimposed that is shown
in the viewfinder can also be output to an external
video monitor.
Camera head microphone output indicator
An indication
≥
appears in the viewfinder whenever a
signal is being output from the camera head’s
microphone.
1-kHz reference signal output
Along with a color bar, a 1-kHz reference signal can
also be output.
..........................................................................................................................................................................................................
1) DPR = Dual Pixel Readout