Chapter 1 Overview
8
Chapter 1
Overview
Features
2
/
3
-inch IT type Power HAD CCD
The DXC-D30/D30P Color Video Camera uses
2
/
3
-
inch IT type Power HAD CCDs. It outperforms most
of the exiting FIT type CCD cameras for high-end use,
in both picture quality and sensitivity.
• Smear: –125 dB
• Sensitivity: F11.0 (at 3200 K, 2000 lux)
• S/N: 63 dB (DXC-D30) or 61 dB (DXC-D30P)
Sophisticated image processing
TruEye™ processing makes possible the following
performance features. This new digital signal
processing has brought reproduction of natural colors
to the level achieved by the human eye.
DynaLatitude™
Enables detailed adjustment of contrast control in each
pixel in accordance with a histogram of luminance
signal levels.
DCC+ (dynamic contrast control plus)
Prevents white breakup when shooting a high intensity
subject, and also prevents color faults in high intensity
subject.
Black stretch and compress
Enables control of luminance signal levels in black
areas without changing the hue.
Variety of detail corrections
• Skin detail function: this function gives a slightly
softer appearance to the subject’s face. The target
skin color can be automatically set.
• Black halo correction
• Red/green vertical detail correction: this function
performs vertical detail compensation for both red
and green signals.
• Horizontal detail frequency control
Recording and managing setup data
In addition to the setup menu that is displayed in the
viewfinder screen, the DXC-D30/D30P is equipped
with the following functions to facilitate camera head
setup.
Setup file system
You can use setup files when making adjustments or
settings. The DXC-D30/D30P comes with factory
preset files that contain shipped settings and you can
freely create user files as well.
Automatic recording of setup data (when
using DSR-1/1P)
When the DXC-D30/D30P is connected to the DSR-1/
1P VTR, two types of setup data can be recorded.
SetupLog™: Shooting-related environment settings
are recorded onto the tape at intervals of a few
seconds. This recorded data can then be used to
reproduce the same shooting conditions in
subsequent shots. It also makes it easier to
identify the causes of problems in previous shots.
SetupNavi™: The setup conditions selected with the
setup menu and setup files are recorded onto the
tape. The recorded setup data can be copied to
other camera heads so that the same setup can be
shared among several camera heads.
ClipLink™ Function (when using DSR-
1/1P)
The ClipLink function can be used at every step from
acquisition to editing. Information necessary for
editing is recorded when shooting to ensure fast and
efficient editing operations.
When you set a recording start (Rec IN) point or when
you press the TAKE button to set a Mark IN point, the
video image at that point is recorded on the tape in
compressed form as an Index Picture. In addition, the
time codes for such editing points (Mark IN/Mark
OUT points or cue points) are recorded along with
other editing point data (such as the cassette number
and scene number) into cassette memory (as ClipLink
log data). Unsuccessful scenes containing faults can
also be marked in cassette memory as “NG”, so that
only the good scenes are taken up from cassette
memory when editing.
Содержание Power HAD DXC-D30F
Страница 6: ......
Страница 70: ......
Страница 91: ......
Страница 92: ...Sony Corporation Printed in Japan ...