Sony PlayStation 2 SCPH-39003 Скачать руководство пользователя

Страница: 19 / 24

Please double check

•

If you experience any of the following
difficulties while using the console, use
this troubleshooting guide to help
remedy the problem. Should any
problem persist, please contact the
appropriate PlayStation

customer

service helpline which can be found:
- on the customer registration card;
- within every PlayStation

and

PlayStation

2 format software manual.

•

Make sure the AC power cord is connected
to the console and the mains, and the TV
(or VCR) or the supplied accessories are
connected to the console correctly.

•

In rare instances, certain DVD videos
may not operate properly with
PlayStation

2. This is primarily due to

variations in the manufacturing process
or software encoding of the DVD video
software. If you experience problems,
try restarting your DVD video. If
problems persist, for more information
call the publisher of the DVD video or
contact the appropriate PlayStation

customer service helpline which can be
found on the customer registration card.

Power

The power is not turned on.

Make sure the AC power cord is connected
securely.

The console is not turned on. Turn on the
console using the MAIN POWER switch on
the back of the console.

Picture

There is no picture.

Make sure the console is connected to the
TV (or VCR) with the AV Cable (integrated
audio/video).

Make sure the console and the TV (or VCR)
are turned on.

Make sure you have selected the video
input on the TV (or VCR).

Make sure the AV Cable (integrated audio/
video) is connected securely.

Make sure the inserted disc can be played
with this console. (see page 3)

Make sure the disc is placed with the label
side facing up. (when using a disc with a
label)

The disc is not inserted correctly.

The console is in pause mode.

Try another set of AV Cables.

Picture noise appears.

The console is placed on an unstable
surface. Place the console on a stable and
flat surface. Do not shake or vibrate the
console.

Clean the disc.

Moisture has condensed inside the console.
(see page 2)

If the video signal from the console has to
go through the VCR to get to the TV, the
copy protection applied to some DVD
videos could affect picture quality. When
playing a DVD video, connect the console
to the TV directly. (see pages 4 and 5)

The aspect ratio cannot be changed
according to the TV when playing wide
screen DVD videos.

Depending on the disc, the aspect ratio is
fixed.

Make sure the console is connected to the
TV directly. (The selector or receiver
(amplifier) may be connected between the
console and the TV.)

Depending on the TV, the aspect ratio is
fixed.

Sound

There is no sound.

Make sure the console is connected to the
TV (or VCR) with the AV Cable (integrated
audio/video).

Make sure the console and the TV (or VCR)
are turned on.

Make sure you have selected the video input
on the TV (or VCR).

Make sure the TV volume is set properly or
“mute” is not selected on the TV.

Make sure the AV Cable (integrated audio/
video) is connected securely.

Make sure the inserted disc can be played
with this console. (see page 3)

Make sure the disc is placed with the label
side facing up. (when using a disc with a
label)

Make sure you have connected the console
to the audio input connectors on the receiver
(amplifier) correctly. Refer also to the
instructions supplied with your amplifier.

Try another set of AV Cables.

Check the speaker connections and settings.
Refer to the operating manual of your
receiver (amplifier).

Make sure you select the appropriate input
on the receiver (amplifier) so that you can
listen to sound from the console. Refer also
to the instructions supplied with your
amplifier.

The console is in pause mode.

The console is in search/slow-motion mode
(when playing a DVD video).

The system setting is not correct for when
the console is connected to audio equipment
with DIGITAL OUT (OPTICAL) connectors.
(see page 6)

Poor sound quality.

The console is placed on an unstable surface.
Place the console on a stable and flat surface.
Do not shake or vibrate the console.

Clean the disc.

Moisture has condensed on the disc.
(see page 2)

You are playing an audio CD or a DVD with
DTS sound tracks.
You can play an audio CD or a DVD with
DTS sound tracks only when the console is

connected to audio equipment with a DTS
decoder.

The surround effect is difficult to hear when
you are playing a DVD video with a Dolby
Digital sound track.

Check the speaker connections and settings.
Refer to the operating manual of your
receiver (amplifier).

Depending on the DVD, the output signal
may not comprise of the entire 5.1 channel
range. It may be monaural or stereo even if
the sound track is recorded in Dolby
Digital.

The sound comes from the centre speaker
only.

Depending on the disc, the sound may
come from the centre speaker only.

Operation

The controller does not function.

Make sure the controller is connected to the
console.

Make sure the Analog Controller
(DUALSHOCK

2) or the Analog Controller

(DUALSHOCK

) is set to the appropriate

mode for the software. (see page 9)

Try another set of controllers.

The software title does not start.