Sony PDW-HD1550, Руководство по обслуживанию

Страница: 60 / 276

2-2-6. Error 71
When an internal storage error is detected, the following error code is displayed.
Main
code Sub code Mainte-
nance
logger Drive log-
ger Description
71 102 ○ × Number of the active drive is not enough. RAID cannot be configured.
2-2-7. Error 91
When interface (between CPU and peripheral devices) errors are detected, the following error codes are displayed.
Tip
IT CPU: COM Express CPU Module/HPR-55 board
IO CPU: IC101/SY-438 board
FP CPU: IC1700/HPR-55 board
Main
code Sub code Mainte-
nance
logger Drive log-
ger Description
91 125 ○ × Communication between IT CPU and FP CPU is interrupted (detected
by IT CPU).
145 ○ × Communication between IT CPU and IO CPU is interrupted (detected
by IT CPU).
155 ○ × Communication between IT CPU and optical drive is interrupted (de-
tected by IT CPU).
215 ○ × Communication between FP CPU and IT CPU is interrupted (detected
by FP CPU).
415 ○ × Communication between IO CPU and IT CPU is interrupted (detected
by IO CPU).
430 ○ × IO CPU detected a flash memory (IC306, IC307/SY-438 board) error.
43A ○ × IO CPU detected a serial number area error.
43C ○ × IO CPU detected an adjustment data area (EEPROM IC1100/HPR-55
board, IC806/AU-366 board, IC502/VPR-118 board) error.
43D ○ × IO CPU detected an hours meter area (FRAM: IC310/SY-438 board)
error.
557 ○ ○ A firmware alarm or startup of the recovery firmware was detected.
595 ○ ○ Communication between Disc Drive LSI (IC100: BD-42 board) and
BRIDGE (IC700: BD-42 board) cannot be established in optical block
assembly Ch-A during startup.
597 ○ ○ Failure in Disc Drive LSI (IC100: BD-42 board) firmware upgrade was
detected in optical block assembly Ch-A during startup.
5A5 ○ ○ Communication between Disc Drive LSI (IC200: BD-42 board) and
BRIDGE (IC700: BD-42 board) cannot be established in optical block
assembly Ch-B during startup.
5A7 ○ ○ Failure in Disc Drive LSI (IC200: BD-42 board) firmware upgrade was
detected in optical block assembly Ch-B during startup.
2-2-8. Error 92
When synchronization system errors are detected, the following error codes are displayed.
PDW-HD1550
2-6