Sony PDW-F335K, Руководство по эксплуатации, Страница: 170 / 193

170
Operation Warnings
A
ppen
dix
Operation Warnings
When a problem occurs at power on or during operation, a
warning is given by one of the following.
• Warning indicators in the status display on the LCD
monitor
• WARNING indicators, and audible warnings from the
speaker and earphones
• Indicators on the viewfinder
The volume of the audible warnings can be adjusted with
the ALARM knob. Set the ALARM knob to the minimum
position to suppress the sound.
Status
display on
the LCD
monitor/
viewfinder
screen WARNING
indicator Warning
sound Indicators in the
viewfinder Problem VDR operation Action to take
Warning
indication
: Continuous
: 1 flash/s
: 4 flashes/s
Continuous
beep
1 beep/s
4 beeps/s
REC/
TALLY BATT
: Continuous
: 1 flash/s
: 4 flashes/s
E**-**
1) – Recording
error Recording stops. Turn off the power
and consult your
Sony dealer.
MEM Full!
2) 2) 2)
– Shockproof
memory
overflow Recording
continuous but may
be substandard. Protect the unit
from shocks and
vibration.
Drive Busy!
2) 2) 2)
– A clip has
been saved to
the unit's
internal
temporary
memory but
not written to
the disc,
because of
vibrations or
some other
problem. Check that
recording to the
disc is possible,
and continue
recording. Reduce vibrations
as far as possible,
and wait until the
ACCESS indicator
goes out.
ILL.REC!
2) 2) 2)
– Input sync
error Recording
continuous but may
be substandard. Turn off the power
and contact your
Sony dealer. (This
indication may be
given momentarily
when a GENLOCK
signal is connected
or disconnected,
but this does not
indicate a problem.)
Disc Error!
2) 2) 2)
– A disc defect
was detected. Recording
continues, avoiding
the defect, but may
be substandard. If defects are
detected
repeatedly,
exchange the disc.