Sony PDW-F335K, Руководство по эксплуатации, Страница: 144 / 193

144
Adjustments and Settings from Menus
Chapt
er 5 Men
u
Dis
pla
y
s
a
nd Det
a
ile
d Set
tings
4
Set ND OFFSET ADJUST to ON.
5
Set the FILTER selector to position 1, and adjust the
iris and white balance, either automatically or by
manual adjustments.
6
Check that “ND1:OK” appears when the adjustments
finish.
7
Set the FILTER selector to position 2, and adjust the
iris and white balance, either automatically or by
manual adjustments.
8
Check that “ND2:OK” appears when the adjustments
finish.
9
Repeat step 5 with the FILTER selector set to
positions 3 and 4.
10
When “ND COMPLETE!” appears, and the displays
for each ND filter have changed to “ND1:OK”,
“ND2:OK”, “ND3:OK”, and “ND4:OK”, set the
POWER to OFF.
When you set the POWER switch to ON again and
display the ND COMP page, ND OFFSET ADJUST
will be OFF.
Although the ND OFFSET ADJUST item is OFF, the
offset settings that you specified will be memorized
and the compensation function will be working. Set
the ND OFFSET ADJUST item to ON again if you
want to specify new offset settings.
To clear the color cast compensation settings
1
Display the ND COMP page of the ADVANCED
menu, and then press the MENU knob.
For details on menu operations, see “Basic Menu
Operations” on page 132.
2
Select CLEAR ND OFFSET, and then press the
MENU knob.
3
When the message “CLEAR DATA OK? YES t
NO” appears, select YES and press the MENU knob.
4
When the message “COMPLETE!” appears, set the
POWER switch to OFF.
Selecting Gamma Tables
You can select gamma curves from among five preset
patterns, for times when you want to achieve film-like
gradations and color reproduction and other effects.
1
Display the PAINT page of the PAINT menu, and then
select GAMMA SELECT and press the MENU knob.
For details on menu operations, see “Basic Menu
Operations” on page 132.
2
Select the desired item and press the MENU knob.
The following settings are available.
When you select CINE1 to CINE4, the knee point is fixed
at a preset value and cannot be adjusted, even if you set
KNEE on the SW STATUS page of the PAINT menu to
ON. DCC is also disabled.
Making Low-Noise mode Settings
Low-noise mode allows you to obtain clear video with
little noise under low light conditions.
1
Select LOW NOISE MODE on the CAM CONFIG
page of the MAINTENANCE menu, and then press
the MENU knob.
For details on menu operations, see “Basic Menu
Operations” on page 132.
2
Select the desired item and press the MENU knob.
You can make the following settings.
Note
Item Description
STD Standard setting (factory default
setting)
CINE1 This smoothes the contrasts in
darker sections and accentuates
gradation changes in brighter
sections, for a calm and quiet
effect.
CINE2 This gives almost the same
results as CINE1. Select this
when you want to obtain 100%
video signals for editing or other
purposes.
CINE3 This emphasizes the contrast
between light and dark more than
CINE1 and CINE2, and also
accentuates gradation changes
on the black side.
CINE4 This emphasizes the contrast in
dark section even more than
CINE3. Contrasts in darker
sections are weaker than STD,
and contrasts in brighter sections
are stronger.
Note
Item
Description
OFF Standard setting (factory default setting)