46
5-3 Details of Functions
Chap
te
r 5
U
s
in
g t
h
e
Ut
ilit
y S
o
ftw
a
re
a) This is supported from firmware version 1.4.
a) This is supported from firmware version 1.4
and utility software version 1.10.
VITC
Specify whether or not
to record the VITC
generated by the
internal time code
generator.
ON:
Record internally
generated VITC.
OFF:
Do not record
internally
generated VITC.
VITC
OUTPUT
Select whether to output
VITC or the time when a
clip was recorded into
VITC during playback.
VITC:
Output VITC.
TIME:
Output the time
when a clip was
recorded.
VIDEO CONTROL
Item name
Settings
WIDE MODE
a)
Specify whether to
record with the
addition of wide picture
information.
Sub-item
1
INPUT
Specify whether to
save wide picture
information to the disc
during recording.
AUTO:
Automatically
record wide
picture information
when it is detected
in the selected
input video signal.
ON:
Always record
wide picture
information.
OFF:
Do not record
wide picture
information.
TIME CODE
Item name
Settings
AUDIO CONTROL
Item name
Settings
DV AUDIO
OUTPUT
SELECT
Select the audio
signals to assign to
i.LINK(AV/C) audio
output channels.
Sub-item
1
CH1/CH2
tr1/2:
Tracks 1 and 2
assigned to audio
output channels 1
and 2.
tr3/4:
Tracks 3 and 4
assigned to audio
output channels 1
and 2.
tr5/6:
Tracks 5 and 6
assigned to audio
output channels 1
and 2.
tr7/8:
Tracks 7 and 8
assigned to audio
output channels 1
and 2.
2
CH3/CH4
tr1/2:
Tracks 1 and 2
assigned to audio
output channels 3
and 4.
tr3/4:
Tracks 3 and 4
assigned to audio
output channels 3
and 4.
tr5/6:
Tracks 5 and 6
assigned to audio
output channels 3
and 4.
tr7/8:
Tracks 7 and 8
assigned to audio
output channels 3
and 4.
DV OUT
AUDIO MODE
Select the audio mode
for S400
(i.LINK)
connector (output).
2ch:
16 bit/48 kHz/2ch
4ch:
12 bit/32 kHz/4ch
