15
Using a Media Adaptor
Cha
p
te
r 2
P
repa
ra
ti
ons
When restoration is completed, a completion message is
displayed for three seconds.
If restoration fails
• A PHU-60/120A/120R on which an error occurred may
become usable again through repeated formatting.
• In some cases, some clips cannot be restored. Playback
of clips that can be restored becomes possible again.
Using a Media Adaptor
Use of the optional MEAD-MS01 or MEAD-SD01 Media
Adaptor permits you to insert a “Memory Stick” (with
MEAD-MS01) or an SDHC card (with MEAD-SD01) to
the memory card slot and use it for recording and playback
in the same way as with an SxS memory card.
Usable “Memory Stick”
“Memory Stick PRO-HG Duo HX” series
Usable SDHC card
Class 10 SDHC card
For details on use of the MEAD-MS01/SD01 Media
Adaptor, refer to the operating instructions of the adaptor.
• External hard disks can be used only when the file
system is FAT. They cannot be used when the file
system is UDF.
• High-speed playback may not be properly achieved with
a “Memory Stick” or an SDHC card.
Formatting (initializing)
When you use a “Memory Stick” or an SDHC card with
this board, formatting is required.
A “Memory Stick” or an SDHC card to be used with this
board must be formatted using the format function of this
board.
It is also necessary to format a “Memory Stick” or an
SDHC card for use if a caution message is displayed when
you mount the “Memory Stick” or SDHC card.
For a “Memory Stick” or an SDHC card that was formatted
with another system unsupported by this board, the
message “Unsupported File System” appears.
Follow the procedure as shown in “To format (initialize) a
memory card”
to format the “Memory Stick” or
SDHC card. However, in step
2
, be sure to select “FAT”.
In formatting, all data in a “Memory Stick” or SDHC card,
including protected images, are erased and cannot be
restored.
To use a “Memory Stick” formatted with this
board with other devices having a “Memory
Stick” slot
• First make a backup copy of the data recorded in the
“Memory Stick”.
• When the backup is done, format the “Memory Stick”
with the device to be used.
Notes
Note