Sony PCV-RX600E, Руководство по обслуживанию

Страница: 23 / 41

5-2 PCV-RX6_ _Series (AM)
Confidential
IEEE1394 access header x2
8 pin standard 2.5 mm single line header for IEEE1394 Front connector.
Connector location on MB See the frame harness daigram
Pin assignments:
Pin Signal Name
1 Shell Ground
2 Ground
3 TPA
4 TPA*
5 TPB
6 TPB*
7 Ground
8 VP ( Power )
VP line need over current protector. Raychem SMD150/33-2 or equivalent is used for that.
USB Front access header
I/O header
20 pin standard 2.5mm dual line header for LED/Switch unit
Connector location on MB See the frame harness daigram
Pin assignments:
Pin Signal Name Pin Signal Name
1 PWR_BTN 11
2 PWR_BTN_G 12 MSG_LED-
3 IDELED- 13 KEYLOCK
4 14 KEYLOCK_G
5 KEY 15 SMI
6 P 16 SMI_G
7 PWR_LED- 17 +5V
8 P 18 HD_LED2-
9 RESET 19 Ground
10 RESET G (GND) 20 SPKR
Battery Holder & Battery
Holder location on MB See the frame harness daigram
Thermal measurement header
This header is used for thermal measurement at evaluation stage.
This connector does not need at production board.
This signal also routed to Super I/O for thermal monitoring.
3pin standard 2mm single line header for CPU thermal measurement
Connector location on MB See the frame harness daigram
Pin assignments:
Pin Signal Name
1 THERMDP ( CPU B14 )
2 THERMDN ( CPU B15 )
3 Ground
1-2 External connector
Parallel
Connector location on MB Rear side, see the frame harness daigram
Pin assignments:
Pin Signal Name Pin Signal Name
1 Strobe# 14 Auto Feed#
2 Data bit 0 15 Fault#
3 Data bit 1 16 INIT#
4 Data bit 2 17 SLCT IN#
5 Data bit 3 18 Ground
6 Data bit 4 19 Ground
7 Data bit 5 20 Ground
8 Data bit 6 21 Ground
9 Data bit 7 22 Ground
10 ACK# 23 Ground
11 Busy 24 Ground
12 Error 25 Ground
13 Select
VGA
Connector location on MB Rear side, see the frame harness daigram
Pin assignments:
Pin Signal Name
1 RED
2 GREEN
3 BLUE
4 NC
5 GND
6 GND
7 GND
8 GND
9 Reserved
10 GND
11 NC
12 DDCDAT
13 HSYNC
14 VSYNC
15 DDCCLK
AUX Audio (not installed*)
4 pin standard 2mm single line header for AUX Audio signal input
Connector location on MB See the frame harness daigram
Pin assignments:
Pin Signal Name
1 Left Line In
2 Ground
3 Ground
4 Right Line In
Video Audio (not installed*)
4 pin standard 2mm single line header for Video Audio signal input
Connector location on MB See the frame harness daigram
Pin assignments:
Pin Signal Name
1 Video_L
2 Ground
3 Ground
4 Video_R
SPDIF OUT (Option)
3 pin standard 2mm single line header for SPDIFoutput
Connector location on MB See the frame harness daigram
Pin assignments:
Pin Signal Name
1 VCC
2 AU_DATA(GPIO[2])
3 Ground
CD audio
4 pin standard 2mm single line header for CD Audio signal input
Connector location on MB See the frame harness daigram
Pin assignments:
Pin Signal Name
1 Left Line In
2 Ground
3 Ground
4 Right Line In
*
Connectors mentioned (not installed) are not
used even they are mounted on MB.
16 pin standard 2.5mm Dual line Box header for Front USB connector.
Connector location on MB See the frame harness diagram
Pin assignments:
Pin Signal Name Pin Signal Name
1 USB VCC1 2 USB VCC3
3 P1- 4 P3-
5 P1+ 6 P3+
7 GND 8 GND
9 KEY 10 GND
11 CP2- 12 P2-
13 CP2+ 14 P2+
15 NC 16 USB VCC3
USBVCC2 and USBVCC3 line needs the over current protector.
Raychem miniSMDC110-2 or equivalent is used for that.