Sony PCV-RS310 - Vaio Desktop Computer Скачать руководство пользователя страница 55

Страница: 55 / 102

Upgrading and Maintaining Components

Covering an Open I/O Slot

Slot covers prevent air from escaping through the empty slot. If air
escapes, the components inside the computer cannot be properly cooled.
This may damage some components, especially the main processor,
which generates the most heat.

Slide the tip of the slot cover between the chassis and system board.

Push the slot cover down until it rests firmly on the lip in the chassis.
All add-on card brackets and slot covers rest on this lip.

Replace the slot cover's screw to secure the I/O slot cover.

Before opening the system unit, save and close all open files, exit all open

applications, turn off the power to all attached peripheral devices, shut
down the computer, and unplug the power cord.

Содержание PCV-RS310 - Vaio Desktop Computer







































































































Результаты поиска

Содержание PCV-RS310 - Vaio Desktop Computer

Отзывы:

Sony PCV-RS310 - Vaio Desktop Computer, Справочное руководство, Страница: 55 / 102

Результаты поиска

Содержание PCV-RS310 - Vaio Desktop Computer

Отзывы: