background image

VAIO Computer System Reference Manual

iv

Safety Information and 
Caution

Your computer’s installed optical drives may 
vary, depending on the system configuration 
you have purchased. See the online 
specification sheet for details on your installed 
optical drives. For questions regarding your 
product or for the Sony Service Center nearest 
you, visit the Sony Computing Support Web 
site at http://www.sony.com/pcsupport

To prevent fire or shock hazard, do not 
expose your desktop to rain or moisture. 
To avoid electrical shock, do not open the 
cabinet. Refer servicing to qualified 
personnel only.

Never install modem or telephone wiring 
during a lightning storm.

Never install telephone jacks in wet 
locations unless the jack is specifically 
designed for wet locations.

Never touch uninsulated telephone wire 
or terminals unless the telephone line has 
been disconnected at the network 
interface.

Use caution when installing or modifying 
telephone lines.

Avoid using the modem during an 
electrical storm. 

Do not use the modem or a telephone to 
report a gas leak in the vicinity of the leak.

The socket outlet shall be installed near 
the equipment and shall be easily 
accessible.

!

To change the backup battery, 

please contact your nearest Sony 
Service Center.

!

Caution: The use of optical 

instruments with this product will 
increase eye hazard. As the laser 
beam used in this product is 
harmful to the eyes, do not 
attempt to disassemble the drive 
cabinet. Refer servicing to 
qualified personnel only.

!

Danger: Visible and invisible laser 

radiation when open. Avoid direct 
exposure to beam.

!

For DVD-RW: Danger—Visible and 

invisible laser radiation when 
open. Avoid direct exposure 
to beam.

!

For CD-RW/CD-ROM: Danger—

Invisible laser radiation when 
open. Avoid direct exposure 
to beam.

!

Caution: For ADSL and V.90 modem 

models; to reduce the risk of fire, 
use only No. 26 AWG or larger 
telecommunication line cord.

Содержание PCV-RS310 - Vaio Desktop Computer







































































































Отзывы: