Inserting an Add-in Board
There are three PCI expansion slots in this computer. One slot contains the factory-installed modem card. The other
slots are empty, enabling you to install add-in boards to expand the functionality of your system. You can install
add-in boards that support Windows
®
98 and the PCI revision 2.1 specification.
To insert an add-in board
! Make sure you observe the proper safety precautions when you add boards to your Sony computer. See "Notes on
Use" in the VAIO Consumer Information Guide.
1.
Shut down your computer and turn off all peripheral devices, such as your printer.
2.
Unplug your computer and any peripheral devices.
3.
Remove the cover as described in
Removing the Cover
.
4.
Locate one of the available expansion slots. Remove the screw, and then remove the slot cover.
5.
Install the add-in board by plugging it into the expansion slot.
6.
Attach any internal cables that the board requires (see the manual for the add-in board).
7.
Replace the cover and reinstall the screws as described on
Replacing the Cover
.
8.
Connect all peripheral devices and AC power, and then turn on the computer.
Page 240
Содержание PCV-R526DS - Vaio Digital Studio Desktop Computer
