6-20
R-Y
B-Y
08
(MAT R)
0B
(B-Y HUE)
09
(MAT B)
0A
(R-Y HUE)
0B
(B-Y HUE)
0A
(R-Y HUE)
R-Y
M
G
B
C
Y
Y
L
For PCS-C150P
Burst position
G
R
B-Y
R-Y
M
G
B
C
Y
Y
L
For PCS-C150
Burst position
G
R
B-Y
6-2-13. Color Reproduction Adjustment
Adjust the color separation matrix coefficient so that the proper
color reproduction is produced.
Subject
Color bar chart standard picture frame
Measurement Point
VIDEO OUT terminal
Measuring Instrument
Vectorscope
Adjustment Page
F
Adjustment Address
08, 09, 0A, 0B
All color luminance points should
Specified Value
settle within each color reproduction
frame.
Adjusting method:
1) Set data: 01 to page: 6, address: 00.
2) Set data: 00 to page: 6, address: 03.
3) Set data: F1 to page: F, address: 10, and press the PAUSE button
of the adjusting remote commander.
4) Adjust the GAIN and PHASE of the vectorscope, and adjust the
burst luminance point to the burst position of the color repro-
duction frame.
5) Change the data of addresses 08, 09, 0A and 0B of page: F, and
settle each color luminance point in each color reproduction
frame.
Note 1:
Be sure to press the PAUSE button of the adjusting re-
mote commander before changing the addresses.
If not, the new data will not be written to the memory.
6) Press the PAUSE button of the adjusting remote commander.
Processing after completing adjustments
1) Set data: E0 to page: F, address: 10, and press the PAUSE but-
ton of the adjusting remote commander.
2) Set data: 26 to page: F, address: 63, and press the PAUSE button
of the adjusting remote commander.
3) Set data: 10 to page: 6, address: 03.
Fig. 6-10.
Fig. 6-12. Direction of the Movements of the Adjustment
Address and Luminance Point.
Fig. 6-11.
