Sony PCS-1 - Video Conferencing Kit, Руководство по эксплуатации, Страница: 247 / 284

247
On Screen Messages
A
ppe
nd
ix
Connection with the Data Solution Box is
not correct. Please reset the system. Connection between the Communication Terminal
and the Data Solution Box is not correct. Turn off
the Communication Terminal, then turn it on again.
Fan in the Data Solution Box does not work
properly. The Data Solution Box is not
usable. The fan equipped with the Data Solution Box is
not working properly. You cannot use the Data
Solution Box.
The Whiteboard cannot be used. The whiteboard can be used for a videoconference
only between PCS-1/1P systems.
Battery in the stylus could be weak. Replace
the battery. The battery in the stylus for the whiteboard is low.
Replace the battery in the stylus with a new one.
The far-end system is not compatible with
the encryption feature. When conducting an encrypted videoconference,
you cannot connect to the system that is not
compatible with the encryption feature.
The encryption feature on a far-end system
is disabled. When conducting an encrypted videoconference,
you cannot connect to the system if the encryption
feature is deactivated.
The encryption feature on a far-end system
is enabled. When conducting a daily conference, you cannot
connect to the system if the encryption feature is
activated.
The entered password for the encryption
feature is not correct. Enter the correct password.
The encrypted videoconference is not
available if any terminal is connected via
ISDN. While the videoconference is held via the ISDN
connection, you cannot connect any terminal via
the LAN connection if your encryption feature is
set to Proprietary encryption.
At least thirteen characters are required as a
password for the encryption feature. You have to enter 13 to 20 characters, numerals or
symbols as the password required for conduct of an
encrypted videoconference.
The conference could not start because the
encryption feature at the near-end side was
disabled. Enable the encryption feature.
The conference could not start because the
encryption feature at the far-end side was
disabled. Have the far-end side enable their encryption
feature.
The standard encryption videoconference
with SIP connection is not available. Change connection methods, or switch to
Proprietary encryption.
The Proprietary encryption videoconference
with ISDN connection is not available. Change connection methods, or switch to standard
encryption.
PPPoE connection has failed. LAN connection has failed. Check the PPPoE
setting.
PPPoE server admission has failed. Access to a network is not admitted by the PPPoE
server.
Connection to the PPPoE server fails. Check the DNS server setting.
Communication via LAN is not available.
Check the LAN cable. The connection to a LAN cannot be made. Check
the LAN cable.
Message Meaning