Sony PCG-NV190P VAIO (primary manual), Руководство пользователя

Страница: 102 / 188

Power Management commands
PowerPanel also provides power management commands that you can use to activate specific power management
functions and to control power for a specific device. You can use these commands to override a profile setting or initiate an
immediate action.

Standby — Puts the system into Standby mode, a power management state that saves the state of the system and
peripheral devices in memory (RAM). Power consumption reduces to a minimum, and the system remains on. To
return the system to the active state, press any key on your computer. Your notebook is preset to enter Standby
mode after 25 minutes.

Hibernate — Provides for the lowest level of power consumption. The system writes the state of the system and
peripheral devices to the hard disk and turns off the system power. To return the system to the original state, use
the power button to turn on power. The system saves the data in the Save to Disk Partition on the hard drive.
Page 102