Sony PCG-505E, Руководство пользователя

Страница: 74 / 101

Getting Help
69
❑ The video output may be directed to an external display attached to
the port replicator. Press Fn+F7 until video output appears on the
LCD.
The screen image on my external display is not centered or sized properly
Use the controls on your external display to adjust the image. See the
manual supplied with your display for more information.
The video image on my screen is too dark
If an external display is connected to the Monitor connector, disconnect
the display.
About CD-ROMs and diskettes
I cannot play a CD-ROM disc
❑ Make sure that the switch of the CD-ROM drive is turned on and that
the AC adapter is connected securely.
❑ The AC adapter’s protection mechanism may be activated. Unplug
the AC adapter from the wall outlet and reconnect it after 2 or 3
minutes.
❑ Make sure the label of the CD-ROM is facing up.
❑ If the CD-ROM disc requires software, make sure the software is
installed according to the program’s instructions.
❑
Moisture condensation may have occurred. Disconnect the CD-ROM
drive and disconnect the power to the drive for at least one hour.
❑ Make sure the CD-ROM drive is properly connected. See
“Connecting the CD-ROM Drive*” on page 36.
❏ Make sure the computer is turned on.
The CD-ROM drive is not detected by the computer or does not run normally.
❑ Check that the PC card you connect is the one supplied for using with
your CD-ROM drive.
❑ Make sure the interface cable is connected to the PC card properly.
❑ Make sure the PC card is seated securely in the PC card slot in the
computer.
❑ Check the PC card slot for bent or broken pins.
✍
All the advice mentioned in this chapter is valid for the PCGA-CD5 CD-ROM drive.
For other models, refer to your CD-ROM drive manual.