74
Additional Information
Symptom
A tape cannot be inserted.
The remote commander does
not function.
The SMARTLINK function
does not work.
The tracking meter does not
appear on the TV screen.
You cannot control other TVs.
The VCR needs to be cleaned.
Others
Remedy
• Check that a tape isn’t already in the tape
compartment.
• Make sure you are pointing the remote commander at
the remote sensor on the VCR.
• Replace all the batteries in the remote commander with
new ones if they are weak.
• Make sure the TV / VIDEO remote control switch is
set correctly.
• Check that your TV complies with SMARTLINK,
MEGALOGIC, EASYLINK, Q-Link, or EURO VIEW
LINK.
• Make sure you use the supplied EURO-AV cable to
connect the VCR and your TV.
• Make sure the EURO-AV cable is connected securely.
• The recording condition of the tape is very poor and
tracking cannot be adjusted.
• The tracking meter does not appear when playing back
an NTSC-recorded tape.
• Set your TV’s code number. The code number may
change when you replace the batteries of the remote
commander.
• Clean the cabinet, panel and controls with a dry, soft
cloth, or a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of solvent,
such as alcohol or benzine.
Troubleshooting (continued)
