background image

Getting Started

Getting Started

11

continued

• TV Direct Rec

You can easily record what you are watching on the TV (other than tapes being
played on this VCR).  For details, see “Recording what you are watching on the TV
(TV Direct Rec)” on page 40.

• One Touch Play

With One Touch Play, you can start playback automatically without turning on the
TV.  For details, see “Starting playback automatically with one button (One Touch
Play)” on page 36.

• One Touch Menu

You can turn on the VCR and TV, set the TV to the video channel, and display the
VCR’s on-screen display automatically by pressing MENU on the remote
commander.

• One Touch Timer

You can turn on the VCR and TV, set the TV to the video channel, and display the
timer recording menu (the TIMER METHOD menu, the TIMER menu, or the
VIDEO PLUS+ menu) automatically by pressing 

 TIMER on the remote

commander.

You can set which timer recording menu is displayed using TIMER OPTIONS in the
OPTIONS-2 menu (see page 67).

• Automatic Power Off

You can have the VCR turn off automatically, if the VCR is not used after you turn
off the TV.

*

1

“MEGALOGIC” is a registered trademark of Grundig Corporation.

*

2

“EASYLINK” is a trademark of Philips Corporation.

*

3

“Q-Link” is a trademark of Panasonic Corporation.

*

4

“EURO VIEW LINK” is a trademark of Toshiba Corporation.

Note

• Not all the TVs respond to the functions above.

Содержание PAL NTSC 4.43 SLV-SE80UX

















































































Отзывы: