background image

3

AE SHIFT for automatically shooting video a little brighter or darker

       

ASSIGN

 

The AE SHIFT function enables you to shoot at an exposure level that is a little higher or lower than the AE function normally selects.

Usage examples

 When the subject is darker than the background, such as when 

shooting a person against light, a snowfield or another bright 
background using the AE function. If you want to capture the 
subject brightly even if the background becomes extremely 
bright, you can shift AE toward the + (plus) side.

 When the subject is too bright compared to the brightness 

of the background. If you want to tone down the subject’s 
brightness even if the background becomes darker, you can 
shift AE toward the – (minus) side.

Moving the AUTO/MANUAL switch to 

[ MANUAL ] enables manual adjustments of the iris, gain, shutter speed and white balance 

settings. Please note using this switch will change the settings for all these exposure settings. Regarding focus adjustment, moving 
the FOCUS switch to MANUAL enables manual adjustment.

Using Manual functions for purposeful shooting

With focus, automatic adjustments kick in when the FOCUS 
switch is moved to [ AUTO ].

AUTO FOCUS function lets you control focus 

adjustment automatically

How to set/operate

1. MENU   [ CAMERA SET ]   [ AE SHIFT ]
2. Select [ 

ON/OFF

 ].

3. Adjust the shift brightness in the range

 .Press the SEL/PUSH EXEC dial to enter the new setting.

This feature is available when auto control is enabled for the iris, shutter speed and/or gain.

LEVEL = 0EV

LEVEL = +2.0EV

LEVEL = –2.0EV

FOCUS switch

- 2.0 (dark) through 0 (normal) to +2.0 (bright)

Содержание NEX-FS700R

























































Отзывы: