Sony MZ-R701, Руководство по эксплуатации

Страница: 59 / 132

59
-GB
“NO SIGNAL” appears in the display when recording from
a portable CD player.
•
There is no digital signal from the portable CD player.
— When recording digitally from a portable CD player, use AC
power adaptor and disable the anti-skip function (such as ESP)
on the CD player (page 15).
There is no recording after a recording operation.
•
The AC power adaptor was unplugged or a power outage occurred
during recording.
The lid does not open.
•
The power sources have been disconnected during recording or
editing, or the battery have been exhausted.
— Set the power sources again, or replace the exhausted battery
with new ones.
No sound comes through the headphones/earphones.
•
The headphones/earphones plug is not firmly connected.
— Plug in the plug of the headphones/earphones firmly to the
remote control. Plug in the plug of the remote control firmly to
i
.
• Volume is too low.
— Adjust the volume by pressing VOL +/–.
Volume cannot be turned up.
•
AVLS is on.
— Set AVLS to “AVLS OFF” (page 36).
An MD is not played from the first track.
•
Disc playing stopped before it came to the last track.
— Press
. repeatedly to go back to the beginning of the disc,
and restart playing after checking the track number in the
display.
Playback sound skips.
•
The recorder is placed where it receives continuous vibration.
— Put the recorder on a stable place.
• A very short track may cause sound to skip.
Sound has a lot of static.
•
Strong magnetism from a television or such device is interfering
with operation.
— Move the recorder away from the source of strong magnetism.