manualshive.com logo in svg

Sony MZ-R501, Руководство по обслуживанию

Поделиться
Скачать
Sony MZ-R501 Скачать руководство пользователя страница 22

22

MZ-R501/R501PC

• Overall CD and MO adjustment items

1. Overall CD adjustment items

Item No.

Description

312

313

CD electrical offset adjustment

314

321

CD tracking error gain adjustment

328

CD TWPP gain adjustment

324

CD tracking error offset adjustment

332

336

CD ABCD gain adjustment

344

CD focus gain adjustment

345

CD tracking gain adjustment

521

CD two-axis sensitivity adjustment

522

2. Overall MO adjustment items

Item No.

Description

112

113

MO electrical offset adjustment

114

118

221

Low reflective CD tracking error gain adjustment

224

Low reflective CD tracking error offset adjustment

232

236

Low reflective CD ABCD level adjustment

244

Low reflective CD focus gain adjustment

245

Low reflective CD tracking gain adjustment

121

MO tracking error gain adjustment

122

MO TON offset adjustment

134

MO TWPP gain adjustment

131

MO double speed read TWPP offset adjustment

132

136

MO ABCD gain adjustment

144

MO focus gain adjustment

145

MO tracking gain adjustment

434

MO write TWPP gain adjustment

431

MO write TWPP offset adjustment

432

MO tracking error offset adjustment

436

MO write ABCD gain adjustment

445

MO write tracking gain adjustment

411

MO normal speed read TWPP offset adjustment

412

MO tracking error offset adjustment

448

20 sec full recording

5-9. Mode Settings

After CD overall and MO overall adjustments are made, the fol-
lowing two modes should be set in the manual mode:

• Setting the auto time stamp mode

This mode is provided so that the auto time stamp (function that
delimits tracks at given intervals) can be turned on/off in the menu
mode.
1. Select the manual mode of the test mode, and set item number

062 (see page 12).

2. Adjust with the 

[VOL+]

 key (adjusted value up) or 

[VOL--]

key (adjusted value down) so that the adjusted value becomes
S30.

3. Press the

X

key.

• Check method of auto time stamp mode

1. Turn the power off and then on.
2. Insert a disc and press the

X

key and 

[REC]

 key at the same

time. Verify that “REC” is flashing on the LCD display and
then push the 

[MENU/ENTER]

 key.

3. Press the

>

key five times.

4. Press the 

[MENU/ENTER]

 key.

5. Verify that each time the

>

key is pressed, the LCD dis-

play changes as follows:
5min 

t

 10min 

t

 15min 

t

 off.

6. Verify that “OFF” is flashing on the LCD display and then

press the 

[MENU/ENTER]

 key.

7. Push the

x

key and remove the disc.

• Setting the ATRAC mode

This mode is provided to set the mode of ATRAC to TYPE-R (high
tone quality mode).
1. Select the manual mode of the test mode, and set item number

867 (see page 12).

This set LCD display

   0 6 2

***S20

This set LCD display

   0 6 2

***S30

This set LCD display

REC

u

  00: 00

EDIT

This set LCD display

REC

u

  00: 00

TimeMK

This set LCD display

   8 6 7

***S00

Содержание MZ-R501





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды