SONY MZ-B3 (E) 3-798-373-22(1)
Editing recorded tracks
23
While the recorder is playing an MD,
press TRACK MARK on the recorder
at the point you want to mark.
A track mark is added and the track
number will increase by one.
Note
TRACK MARK on the remote controller
does not function during playback.
To add track marks while recording
See "Track marking while recording"
(page 13).
To erase track marks
See "Erasing a track mark" (page 24).
Notes
•
When you press
p
after adding track
marks, "Toc Edit" flashes and the
recorder starts writing the new data to
the MD. Do not move or jog the
recorder while "Toc Edit" is flashing in
the display.
•
You cannot add track marks on an MD
that is record-protected. Before adding
track marks, close the tab on the side of
the MD.
Various ways of playback
Editing recorded tracks
4
1
2
3
4
1
2
3
4
5
Track numbers increase
Track marking
z
Editing recorded
tracks
You can edit your recordings by
adding or erasing track marks, or
erasing tracks.
Premastered MDs cannot be edited.
Track marking a
recording
You can add track marks so that you
can quickly find and play from the
marked position.
The track numbers will increase as
follows.
.
MONO
MONO
Track number
Elapsed time
of the track
being played
TRACK MARK
