Sony MVS8000SF-C, Руководство по установке

Страница: 11 / 72

1-3
MVS-8000SF
1-4. Installing the Options
The MVS8000SF-C is shipped from the factory with the
necessary option boards (refer to the following table)
already installed in accordance with the specified system
configuration.
The following options are available for the MVS-8000SF.
MVS-8000SF Option List
Model name Board Structure
Plug-in board Connector board
MKS-8110HD _ CNI-9 board
17 Input Board
MKS-8110SD _ CNI-10 board
17 Input Board
MKS-8110M
_
CNI-22 board
17 Input Board
MKS-8160HD OUT-23 board CNO-11 board
8 Output Board
MKS-8160SD OUT-24 board CNO-17B board
8 Output Board
MKS-8160M OUT-27 board CNO-23 board
8 Output Board
MKS-8170HD DIF-119 board _
DME Interface Board
MKS-8170SD DIF-122 board _
DME Interface Board
MKS-8170M DIF-141 board _
DME Interface Board
MKS-8210HD DI-40 board
_
Mix/Effect Board Set
DO-41 board _
MIX-45 board _
KPC-16 board _
MKS-8210SD DI-41 board _
Mix/Effect Board Set
DO-42 board _
MIX-45 board _
KPC-16 board
_
MKS-8210M DI-43 board _
Mix/Effect Board Set
DO-44 board _
MIX-45 board _
KPC-16 board
_
MKS-8420M CC-90 board _
Color Corrector Board
MKS-8440HD DIO-62 board _
Frame Memory Board Set
MY-102 board _
MKS-8440SD DIO-63 board _
Frame Memory Board Set
MY-102 board _
Model name Board Structure
Plug-in board Connector board
MKS-8440M DIO-74 board _
Frame Memory Board Set
MY-102 board _
MKS-8210K1 DI-43 board _
1 M/E Upgrade Kit
DO-44 board
_
MKS-8440K1 DIO-74 board _
Frame Memory Upgrade Kit
HK-PSU04 _ _
Power Supply Unit
1-4-1. Installing the Plug-in Boards
Each plug-in board of the Multi Format Switcher MVS-
8000SF is allocated to a specific slot into which they must
be installed. Check to see that the respective plug-in boards
are installed in their respective slots.
The name of the board is shown near the eject lever at the
right-most end of each plug-in board.
The respective slot numbers to which plug-in boards that
are allocated are shown inside the front panel of the MVS-
8000SF. Install the respective plug-in board according to
this instruction.
n
Check to see that connectors of the plug-in boards are
securely into the MB-974 board of the MVS-8000SF
without loose contact.
If any plug-in board is inserted into the incorrect slot, it
causes a system error and the system will not work correct-
ly.
c
Be sure to turn off the POWER switch before starting
installation work.
If installation work is started with the POWER switch left
on, it may cause electrical shock or damage to printed
circuit boards.
1-4. Installing the Options