Sony MHC-ZX10 - Mini Hifi Component System Скачать руководство пользователя страница 51

Страница: 51 / 60

Additional Information

There is severe hum or noise.

• A TV or VCR is placed too close to the stereo

system. Move the stereo system away from
the TV or VCR.

“--:--” appears in the display.

• A power interruption occurred. Set the clock

and timer settings again.

The timer does not function.

• Set the clock correctly.

“Daily 1”, “Daily 2”, or “REC” do not
appear when you select “Timer Select ?”
menu.

• Set the timer correctly.
• Set the clock.

The remote does not function.

• There is an obstacle between the remote and

the system.

• The remote is not pointing in the direction of

the system’s sensor.

• The batteries have run down. Replace the

batteries.

There is acoustic feedback.

• Decrease the volume level.
• Move the microphone away form the speakers

or change the direction of the microphone.

The color irregularity on a TV screen
persists.

• Turn off the TV set once, then turn it on after

15 to 30 minutes. If the color irregularity still
persists, place the speakers farther away from
the TV set.

“PROTECT” and “PUSH POWER” appear
alternately.

• A strong signal was input. Press

?/1

to turn

off the power, leave the system turned off for
a while, then press

?/1

again to turn on the

power.
If “PROTECT” and “PUSH POWER” appear
alternately even after the power is turned on
again, press

?/1

to turn off the power and

check the speaker cord.

Speakers

Sound comes from one channel or
unbalanced left and right volume.

• Check the speaker connection and speaker

placement.

Sound lacks bass.

• Check that the speaker’s + and – jacks are

connected correctly.

CD Player

The CD tray does not close.

• The CD is not placed properly.

The CD will not play.

• The CD is not lying flat in the disc tray.
• The CD is dirty.
• The CD is inserted label side down.
• Moisture condensation has built up. Remove

the CD and leave the system turned on for
about an hour until the moisture evaporates.

Play does not start from the first track.

• The player is in program or shuffle mode.

Select “1 Disc” or “All Discs” in the “Play
Mode” menu (pages 23, 25).

“Over” is displayed.

• You have reached the end of the CD. Press

and hold

to return.

continued

Содержание MHC-ZX10 - Mini Hifi Component System





























































Результаты поиска

Содержание MHC-ZX10 - Mini Hifi Component System

Отзывы:

Похожие инструкции для MHC-ZX10 - Mini Hifi Component System

Бренды по названию

Популярные бренды

Sony MHC-ZX10 - Mini Hifi Component System, Руководство по эксплуатации

Результаты поиска

Содержание MHC-ZX10 - Mini Hifi Component System

Отзывы:

Похожие инструкции для MHC-ZX10 - Mini Hifi Component System

Бренды по названию

Популярные бренды