![background image](http://html.mh-extra.com/html/sony/mhc-wz5/mhc-wz5_operating-instructions-manual_1330153032.webp)
32
GB
To save a tape permanently
To prevent a tape from being accidentally recorded
over, break off the cassette tab from side A or B as
illustrated.
If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape.
Before placing a cassette in the tape
deck
Take up any slack in the tape. Otherwise, the tape may
get entangled in the parts of the tape deck and become
damaged.
When using a tape longer than
90 minutes
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding
frequently. The tape may get entangled in the tape
deck.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use. Be
sure to clean the tape heads before you start an
important recording or after playing an old tape. Use a
separately sold dry-type or wet-type cleaning cassette.
For details, refer to the instructions of the cleaning
cassette.
Demagnetising the tape heads
Demagnetise the tape heads and the metal parts that
have contact with the tape after every 20 to 30 hours of
use with a separately sold demagnetising cassette. For
details, refer to the instructions of the demagnetising
cassette.
Amplifier section
European model:
DIN power output (rated): 75 + 75 watts (6 ohms at
1 kHz, DIN)
Continuous RMS power output (reference):
100 + 100 watts (6 ohms at
1 kHz, 10% THD)
Music power output (reference):
200 + 200 watts (6 ohms at
1 kHz, 10% THD)
Except for European model:
The following measured at AC 120, 220, 240 V AC,
50/60 Hz (Australian model at 240 V AC, 50/60 Hz,
Korean model at 220 V AC, 60 Hz, Taiwan model at
120 V AC, 50/60 Hz)
DIN power output (rated): 100 + 100 watts (6 ohms at
1 kHz, DIN)
Continuous RMS power output (reference):
140 + 140 watts (6 ohms at
1 kHz, 10% THD)
Inputs
MD (VIDEO) IN (phono jacks):
Voltage 450 mV/250 mV,
impedance 47 kilohms
Outputs
PHONES (stereo mini jack):
Accepts headphones of
8 ohms or more
MD (VIDEO) OUT (phono jacks):
Voltage 250 mV,
impedance 1 kilohms
FRONT SPEAKER:
Use only the supplied
speaker SS-WZ50/WZ5/
WZ5E
SUB WOOFER (Except for European model):
Voltage 320 mV,
impedance 1 kilohms
CD player section
System
Compact disc and digital
audio system
Laser
Semiconductor laser
(
λ
=780 nm)
Emission duration:
continuous
Frequency response
2 Hz – 20 kHz (±0.5 dB)
Wavelength
780 – 790 nm
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 90 dB
Break off the
cassette tab
Specifications
Содержание MHC-WZ5
Страница 36: ...Sony Corporation Printed in Malaysia ...