Sony MHC-V3, Руководство по эксплуатации

Страница: 26 / 36

26 GB
Troubleshooting
Should you encounter a problem with
your system, find your problem in the
troubleshooting checklist below and take
the corrective action.
If the problem persists, consult your
nearest Sony dealer.
Note that if the service personnel changes
some parts during repair, these parts may
be retained.
General
The system has entered standby
mode.
• This is not a malfunction. The system
enters standby mode automatically in
about 15 minutes when there is no
operation or audio signal output
(page 24).
The clock or timer setting is canceled.
• The AC power cord is disconnected or a
power failure occurred. Set the clock
(page 9) and timer (page 23) again.
There is no sound.
• Adjust the volume.
• Check the connection of the optional
equipment, if any (page 8).
• Turn on the connected equipment.
• Unplug the AC power cord, then plug in
the AC power cord again and turn on the
system.
There is severe hum or noise.
• Move the system away from sources of
noise.
• Connect the system to a different wall
outlet.
• Install a noise filter (commercially
available) to the AC power cord.
• Turn off surrounding electrical
equipment.
The timer does not function.
• Check the timer setting and set the
correct time (page 23).
• Cancel the Sleep Timer function
(page 23).
The remote control does not function.
• Remove the obstacles between the
remote control and the unit.
• Move the remote control closer to the
unit.
• Point the remote control at the unit’s
sensor.
• Replace the batteries (R6/size AA).
• Move the unit away from the
fluorescent light.
There is acoustic feedback.
• Reduce the volume.
“CHILD LOCK” appears when you
press any button on the unit.
• Set the Child Lock function to off
(page 24).
Disc player
The disc tray does not open and
“LOCKED” appears in the display
panel.
• Consult your nearest Sony dealer or
local authorized Sony service facility.
The disc tray does not close.
• Load the disc correctly.
If “PROTECTX” (X is a number)
appears in the display panel
Immediately unplug the AC power
cord, and check the following items.
• Is the USB port short-circuited?
• Is anything blocking the ventilation
holes of the unit?
After checking the above items and
fixing any problems, plug in the AC
power cord again and turn on the
system. If the issue persists, consult
your nearest Sony dealer.