Sony MHC-V3, Руководство по эксплуатации

Страница: 13 / 36

13 GB
USB T
ransf
er
Transferring music
You can transfer music from a disc
(AUDIO CD or MP3 disc only) to a USB
device.
The audio format of files transferred by
this system is MP3.
Notes
• Do not remove the USB device during
transfer or erase operations. Doing so may
corrupt the data on the USB device or damage
the USB device itself.
• MP3/WMA/AAC files are transferred with
the same bit rate as the original files.
• USB transfer and erase operations are
disabled while the disc tray is open.
Note on copyright-protected
content
The transferred music is limited to private
use only. Use of the music beyond this
limit requires permission of the copyright
holders.
To select the playback source or
transfer destination (USB Memory
Select)
See page 10.
To select the bit rate
You can select a higher bit rate when you
want to transfer music from an AUDIO
CD.
Use the buttons on the unit to perform this
operation.
1
Press OPTIONS.
2
Press V/v repeatedly to select “BIT
RATE”, then press ENTER.
3
Press V/v repeatedly to select the
bit rate you want, then press
ENTER.
• 128 KBPS: encoded MP3 files have
smaller file size and lower audio
quality.
• 256 KBPS: encoded MP3 files have
bigger file size but higher audio
quality.
To exit the options menu, press
OPTIONS.
You can easily transfer all the music on a
disc to USB device (Synchronized
Transfer). You can also transfer a single
track or audio file during playback
(REC1 Transfer).
1
Connect a USB device to the
port.
2
Press CD, then load the disc.
3
For Synchronized Transfer:
When playback is stopped, press
PLAY MODE repeatedly to select the
play mode you want.
Notes
• If you start transferring in Shuffle Play
(“FLDR SHUF”), the selected play mode
changes to “FLDR” automatically.
• If you start transferring in Shuffle Play
(except “FLDR SHUF”), Repeat Play or
Program Play with no steps, the selected
play mode changes to Normal Play
automatically.
For REC1 Transfer:
Select the track or audio file you want
to transfer, then start playback.
4
Press REC TO USB on the unit.
“PUSH ENTER” appears in the
display panel.
5
Press ENTER.
The transfer starts when “DO NOT
REMOVE” appears in the display
panel.
USB Transfer
Transferring music from a disc