![background image](http://html.mh-extra.com/html/sony/mhc-v21/mhc-v21_operating-instructions-manual_1330101028.webp)
28
US
MHC-V21.US.4-736-607-
12
(1)
Note
Depending on your NFC-compatible
BLUETOOTH device, you may need to turn
on the NFC function in advance.
For details, refer to the operating
instructions of the BLUETOOTH device.
1
Touch the BLUETOOTH device to
the N-Mark on the unit until the
BLUETOOTH device responds to
the system.
Complete the connection by
following the instructions displayed
on the BLUETOOTH device.
When the BLUETOOTH connection is
established, the BLUETOOTH device
name appears on the display.
2
Start playback of an audio
source on the BLUETOOTH
device.
For details, refer to the operating
instructions of your BLUETOOTH
device.
Hint
If pairing and the BLUETOOTH connection
fail, do the following.
— Remove the case from the BLUETOOTH
device if using a commercially
available case.
— Touch the BLUETOOTH device to the
N-Mark on the unit again.
To terminate the BLUETOOTH
connection
Touch the BLUETOOTH device to the
N-Mark on the unit again.
Setting the BLUETOOTH
audio codecs
You can enable AAC, LDAC or SBC
codec reception from BLUETOOTH
device. AAC/LDAC can be selected
only when the BLUETOOTH device
supports AAC/LDAC.
1
Press OPTIONS.
2
Press / repeatedly to select
“BT CODEC”, then press
.
3
Press / repeatedly to select
the setting, then press
.
•
•
“AUTO”: Enable reception in AAC
or LDAC codec format.
•
•
“SBC”: Receive in SBC codec
format.
To exit the options menu, press
OPTIONS.
Note
•
•
You can enjoy high quality sound if AAC
or LDAC is selected. If you cannot listen
to AAC or LDAC sound from your device
or the sound is interrupted, select “SBC”.
•
•
If you change this setting while the
system is connected to a BLUETOOTH
device, the BLUETOOTH device will
be disconnected. To connect to the
BLUETOOTH device, perform the
BLUETOOTH connection again.