background image

35

There is severe hum or noise.

• A TV or VCR is placed too close to the

stereo system.  Move the stereo system
away from the TV or VCR.

“0:00” (or “12:00AM”) flashes in the
display.

• A power failure occurred.  Set the clock

and timer settings again.

The timer does not function.

• Set the clock correctly.

“DAILY” and “REC” do not appear when
you press the TIMER SELECT button.

• Set the timer correctly.
• Set the clock.

The remote does not function.

• There is an obstacle between the remote

and the system.

• The remote is not pointing in the

direction of the system’s sensor.

• The batteries have run down.  Replace the

batteries.

There is acoustic feedback.

• Decrease the volume level.

The color irregularity on a TV screen
persists.

• Place the speakers farther away from the

TV set.

Speakers

Sound comes from one channel or
unbalanced left and right volume.

•Check the speaker connection and

speaker placement.

CD Player

The CD tray does not close.

•The CD is not placed properly.

The CD will not play.

•The CD is not lying flat in the disc tray.
•The CD is dirty.
•The CD is inserted label side down.
•Moisture condensation has built up.

Remove the CD and leave the system
turned on for about an hour until the
moisture evaporates.

Play does not start from the first track.

•The player is in Program or Shuffle Play

mode.  Press PLAY MODE repeatedly
until “PROGRAM” or “SHUFFLE”
disappears.

“OVER” is displayed.

•You have reached the end of the CD.

Press and hold 

0

 to return.

continued

Содержание MHC-GRX3









































Отзывы: