Chapter 1: Setting Up
4
AM loop antenna connection
Connect the supplied loop antena to the
AM and the
y
terminals.
To improve the FM reception
Connect an external FM aerial to the
FM 75
Ω
and
y
terminals, using a 75-ohm
coaxial cable.
Important
Ground the external antenna from
y
terminal against lightning with the screw
clamp. To prevent a gas explosion, do not
connect the ground wire to a gas pipe.
To improve the AM reception
After you connect the AM antenna, connect
a 6- to 15-meter insulated wire to the AM
terminal. Connect the
y
terminal to earth.
Important
Ground the external antenna against
lightning from the
y
terminal. To prevent a
gas explosion, do not connect the ground
wire to a gas pipe.
Connecting the
Stereo
Use the illustrations below to connect your
stereo.
If you want to connect any optional
components to the stereo, see “Connecting
Optional Equipment” in Chapter 6.
Connecting the
Speakers
To connect the front speakers
Connect the right front speaker to the
SPEAKER R connectors and the left front
speaker to the SPEAKER L connectors with
the red cords to
‘
and the black cords to
’
.
‘
R
L
’
‘
’
Connecting the
Antennas
Chapter 1:
Setting
Up
Connecting the Stereo
Inserting the Batteries
Setting the Clock
75-ohm coaxial cable
(not supplied)
Screw clamp
Ground wire
(not supplied)
Ground wire
(not supplied)
Insulated wire
(not supplied)
Screw clamp
STEP 1
STEP 2
FM 75
Ω
AM
y
FM 75
Ω
AM
y
FM lead antenna* (supplied)
FM 75
Ω
AM
* Note: Extend it horizontally
AM loop antenna (supplied)