23
Se pueden ajustar los elementos siguientes
(consulte la referencia de página para obtener
más información):
Uso de un equipo opcional
Equipo auxiliar de audio
Si conecta un dispositivo de audio portátil
opcional a la toma de entrada AUX (minitoma
estéreo) de la unidad y simplemente selecciona la
fuente, podrá escuchar por los altavoces del
automóvil. Puede ajustar cualquier diferencia en
el nivel de volumen entre la unidad y el
dispositivo de audio portátil. Siga el
procedimiento explicado a continuación:
Conexión del dispositivo de audio
portátil
1
Apague el dispositivo de audio portátil.
2
Baje el volumen de la unidad.
CLOCK-ADJ
(Ajuste del reloj) (página 7)
BEEP
Activa el sonido de los pitidos: “ON”, “OFF”.
AUX-A
*
1
(Audio AUX)
Activa la visualización de la fuente AUX: “ON”,
“OFF” (página 23).
A.OFF
La unidad se desconecta automáticamente
después del tiempo deseado cuando se
encuentra apagada: “NO”, “30S (segundos)”,
“30M (minutos)”, “60M (minutos)”.
MIC
*
1
– “EXT”: para cambiar automáticamente al
micrófono externo si se encuentra conectado.
– “INT”: para seleccionar el micrófono interno
solamente.
B.OUT
(Desactivar pantalla)
La iluminación de todas las fuentes se apaga
automáticamente (por ejemplo, durante la
reproducción de CD o la recepción de radio,
etc.) si no se realiza ninguna operación durante
5 segundos: “ON”, “OFF”.
Para volver a activar la luz, presione cualquier
botón de la unidad (cuando se activa este ajuste,
el funcionamiento remoto no se encuentra
disponible).
DEMO
(Demostración)
Activa el modo de demostración: “ON”, “OFF”.
DIM
(Atenuador)
Cambia el brillo de la pantalla: “ON”, “OFF”.
A.SCRL
*
2
(Desplazamiento automático)
Los elementos largos se desplazan
automáticamente: “ON”, “OFF”.
LOCAL
(Modo de búsqueda local)
– “ON”: para que se sintonicen solamente las
emisoras de señal más intensa.
– “OFF”: para ajustar la recepción normal.
MONO
*
3
(Modo monoaural)
Se selecciona el modo de recepción monoaural
para mejorar la recepción de FM de mala
calidad: “ON”, “OFF”.
Z.TIME
*
2
(Tiempo de ajuste del modo Zappin)
Permite seleccionar el tiempo de reproducción
de la función ZAPPIN.
– “Z.TIME-1 (unos 6 segundos)”, “Z.TIME-2
(unos 9 segundos)”, “Z.TIME-3 (unos
30 segundos)”.
LPF
(Filtro de paso bajo)
Permite seleccionar la frecuencia de corte del
altavoz potenciador de graves: “OFF”, “80Hz”,
“100Hz”, “120Hz”, “140Hz”, “160Hz”.
LPF NORM/REV
(Filtro de paso bajo normal/
inverso)
Permite seleccionar la fase cuando el filtro de
paso bajo se encuentra activado: “NORM”,
“REV”.
HPF
(Filtro de paso alto)
Permite seleccionar la frecuencia de corte del
altavoz frontal/posterior: “OFF”, “80Hz”,
“100Hz”, “120Hz”, “140Hz”, “160Hz”.
LOUD
(Sonoridad)
Refuerza los graves y agudos para obtener un
sonido claro con niveles de volumen bajos:
“ON”, “OFF”.
BTM
(página 12)
DM+
*
2
Para ajustar la función DM+: “ON”, “OFF”.
BT INIT
*
1
(página 21)
*1
Cuando la unidad está apagada.
*2
Cuando se activa la fuente CD/USB.
*3
Cuando se recibe FM.
continúa en la página siguiente
t