25
Example: Combining tracks B and C.
1
While playing the MD you want to edit,
press
(MENU)
.
2
Press either side of
(DISC/PRST)
repeatedly until “Combine” appears.
3
Press
(ENTER)
.
4
Press either side of
(SEEK/AMS)
repeatedly to select the set of tracks you
want to combine.
5
Press
(ENTER)
to combine the tracks.
“Complete!” appears, and the selected
tracks are combined.
6
To continue combining tracks, repeat
steps 4 and 5.
7
Press
(MENU)
twice.
To cancel the combining procedure, press
(MENU)
twice anywhere before step 5.
1
1
2
2
4
3
3
Track
number
Original
tracks
Combine
Combine tracks B
and C.
5
Press
(ENTER)
to mark the dividing
point.
The unit repeatedly plays the next few
seconds after the marked point.
6
Press either side of
(SEEK/AMS)
to fine-
tune the dividing point.
7
While monitoring the track, press
(ENTER)
at the point where you want to
divide.
“Complete!” appears, and the selected track
is divided.
8
To continue dividing tracks, repeat steps
4 to 7.
9
Press
(MENU)
twice.
To cancel the dividing procedure altogether,
press
(MENU)
twice anywhere before step 7.
Notes
• The name applied to the original track will
become the label for the first new track of the
divided track, and the second one will not be
labelled.
• “Impossible” appears if the unit cannot divide a
track any more because the MD has been edited
too many times. This is due to the system
limitation of MDs and is not a malfunction of the
unit.
Tip
To combine the divided tracks again, use the
Combine function (see page 25).
Combining recorded
tracks
— Combine function
This function lets you put several tracks or
several independently recorded portions
together into a single track. The total number
of tracks decreases by one, and all subsequent
tracks are renumbered.
Selected track Nos.
