Sony MDX-C5970 страница 24 Скачать руководство пользователя

Страница: 24 / 28

Troubleshooting guide

The following checklist will help you remedy problems you may encounter with your unit.
Before going through the checklist below, check the connection and operating procedures.

General

Problem

No sound.

The contents of the memory
have been erased.

Indications do not appear in the
display.

No beep sound.

Cause/Solution

•Cancel the ATT function.
•Set the fader control to the center position for two-speaker

systems.

•Rotate the dial in a clockwise direction to adjust the volume.

• The power cord or battery has been disconnected.
• The reset button has been pressed.

Store again into the memory.

Remove the front panel and clean the connectors. See
“Cleaning the connectors” (page 22) for details.

The beep sound is canceled (page 13).

Problem

Preset tuning is not possible.

Automatic tuning is not
possible.

The “ST” indication flashes.

Cause/Solution

• Store the correct frequency in the memory.
• The broadcast signal is too weak.

The broadcast signal is too weak.

Use manual tuning.

• Tune in the frequency precisely.
• The broadcast signal is too weak.

Set to the MONO mode (page 10).

Radio reception

CD/MD playback

Cause/Solution

• Another MD is already loaded.
• The MD is forcibly inserted upside down or in the wrong way.

Defective MD or dirty CD.

The ambient temperature exceeds 50°C.

Press

for two seconds.

Press the reset button.

• The unit is installed at an angle of more than 20°.
• The unit is not installed in a sturdy part of the car.

Problem

A disc cannot be loaded.

Playback does not begin.

A disc is automatically ejected.

MD will not eject.

The operation buttons do not
function.

The sound skips due to
vibration.

Содержание MDX-C5970





























Результаты поиска

Содержание MDX-C5970

Отзывы:

Похожие инструкции для MDX-C5970

Бренды по названию

Популярные бренды

Sony MDX-C5970, Руководство по эксплуатации

Результаты поиска

Содержание MDX-C5970

Отзывы:

Похожие инструкции для MDX-C5970

Бренды по названию

Популярные бренды