Sony MDS-JA20ES - Minidisc Deck Скачать руководство пользователя страница 23

Страница: 23 / 88

– 23 –

4-5-1. Operating the Continuous Playback Mode

1. Entering the continuous playback mode
(1)

Set the disc in the unit. (Whichever recordable discs or discs for playback only are available.)
A disc is loaded automatically, if pushing the tray.

(2)

Rotate the

[ AMS ]

knob and display “CPLAY MODE” (C30).

(3)

Press the

[YES]

button to change the display to “CPLAY MID”.

(4)

When access completes, the display changes to “C =

AD =

”.

Note:

The numbers “ ” displayed show you error rates and ADER.

2. Changing the parts to be played back
(1)

Press the

[YES]

button during continuous playback to change the display as below.

When pressed another time, the parts to be played back can be moved.

(2)

When access completes, the display changes to “C =

AD =

”.

Note:

The numbers “ ” displayed show you error rates and ADER.

3. Ending the continuous playback mode
(1)

Press the

[MENU/NO]

button. The display will change to “CPLAY MODE”.

(2)

Press the

button to remove the disc.

Note:

The playback start addresses for IN, MID, and OUT are as follows.

40h cluster

MID 300h cluster
OUT 700h cluster

4-5-2. Operating the Continuous Recording Mode (Use only when performing self-recording/palyback check.)

1. Entering the continuous recording mode
(1)

Set a recordable disc in the unit.
A disc is loaded automatically, if pushing the tray.

(2)

Rotate the

[ AMS ]

knob and display “CREC MODE” (C31).

(3)

Press the

[YES]

button to change the display to “CREC MID”.

(4)

When access completes, the display changes to “CREC (

” and

REC

lights up.

Note:

The numbers “ ” displayed shows you the recording position addresses.

2. Changing the parts to be recorded
(1)

When the

[YES]

button is pressed during continuous recording, the display changes as below.

When pressed another time, the parts to be recorded can be changed.

REC

goes off.

(2)

When access completes, the display changes to “CREC (

” and

REC

lights up.

Note:

The numbers “ ” displayed shows you the recording position addresses.

3. Ending the continuous recording mode
(1)

Press the

[MENU/NO]

button. The display changes to “CREC MODE” and

REC

goes off.

(2)

Press the

button to remove the disc.

Note 1:

The recording start addresses for IN, MID, and OUT are as follows.

40h cluster

MID 300h cluster
OUT 700h cluster

Note 2:

The

[MENU/NO]

button can be used to stop recording anytime.

Note 3:

Do not perform continuous recording for long periods of time above 5 minutes.

Note 4

: During continuous recording, be careful not to apply vibration.

4-5-3. Non-Volatile Memory Mode (EEP MODE)

This mode reads and writes the contents of the non-volatile memory.
It is not used in servicing. If set accidentally, press the

[MENU/NO]

button immediately to exit it.

“CPLAY MID”

“CPLAY OUT”

“CPLAY IN”

≠

“CPLAY MID”

“CPLAY OUT”

“CPLAY IN”

≠

Содержание MDS-JA20ES - Minidisc Deck

























































































Результаты поиска

Содержание MDS-JA20ES - Minidisc Deck

Отзывы:

Бренды по названию

Популярные бренды

Sony MDS-JA20ES - Minidisc Deck, Руководство по обслуживанию

Результаты поиска

Содержание MDS-JA20ES - Minidisc Deck

Отзывы:

Бренды по названию

Популярные бренды