Sony MCS-8M, Руководство по эксплуатации

Страница: 52 / 64

II-52
Video Input Setup (Video (Input))
Ch
ap
te
r 8
Se
tu
p (
[S
e
tu
p
] Menu)
Video Input Setup (Video (Input))
Make video input related settings in the items of the [Setup] menu > [Video (Input)] menu.
About DVI input signals
• Set the resolution of the DVI signal to be input to one of the following in accordance with the setting of the signal format
of the unit (page II-49) . Normal images may not be obtained with other resolutions.
Although signals with resolutions other than 1920 × 1080 may be accepted when DVI input signals are set to digital,
operation is not guaranteed.
• The image size of the DVI input signals will be adjusted to fit the screen of the unit’s signal format while maintaining
its aspect ratio.
Details on [Video (Input)] Menu
Signal Resolution 1080i/59.94,
1080i/50 720p/59.94, 720p/50,
480i/59.94, 576i/50
Analog XGA (60 Hz) 1024 × 768 Yes Yes
WXGA (60 Hz) 1280 × 768 Yes Yes
SXGA (60 Hz) 1280 × 1024 Yes Yes
Digital HDTV (50 Hz) 1920 × 1080 Yes –
HDTV (60 Hz) 1920 × 1080 Yes –
Tip
Menu item Description Knob Parameter Meaning Setting range
SDI1
to
SDI4
Set the SDI signals to input via the SDI IN 1 to 4
connectors. V3 FS Frame
synchronizer Off, On
V4 Name Input source
name IN1 to IN8, CAM1
to 8, VTR1 to 8,
PC1 to 8,
SDI1 to
4 , DVI, HDMI1 to 3,
VIDEO1 to 3
DVI Set the format and input source name of the signal to
input via the DVI-I IN connector. When you change the
signal format, press the V3 knob to confirm the change.
• For details on the DVI signal to be input, see
“About
DVI input signals” (page II-52 ) .
• For details on the formats of DVI-I input video
signals, also see “Configuring the Format of the
Signal Input to the DVI-I Connector” ( c Basic
Operation) .
V3 Format Format of
DVI-I input
video signal XGA , SXGA,
WXGA, HDTV50,
HDTV60
V4 Name Input source
name IN1 to IN8, CAM1
to 8, VTR1 to 8,
PC1 to 8, SDI1 to 4,
DVI , HDMI1 to 3,
VIDEO1 to 3
HDMI1
to
HDMI3
Set the input source names of the HDMI input signals
to be input via the HDMI IN 1 to 3 connectors. V4 Name Input source
name IN1 to IN8, CAM1
to 8, VTR1 to 8,
PC1 to 8, SDI1 to 4,
DVI,
HDMI1 to 3 ,
VIDEO1 to 3
VIDEO1
to
VIDEO3
Set the pedestal levels and input source names of the
video input signals to be input via the VIDEO IN 1 to 3
connectors.
When you change a pedestal level, confirm the
modification by pressing the V3 knob. V3 Setup Pedestal level 0IRE , 7.5IRE
V4 Name Input source
name IN1 to IN8, CAM1
to 8, VTR1 to 8,
PC1 to 8, SDI1 to 4,
DVI, HDMI1 to 3,
VIDEO1 to 3