Sony MCS-8M, Руководство по эксплуатации

Страница: 10 / 64

II-10
Setting Wipes
Ch
ap
te
r 2
Vid
e
o
Swit
ch
in
g
Setting Wipes
A wipe is a transition effect that switches to the next video
by applying an effect that removes the program output
video in a manner that appears as it is being wiped off with
the video to be output next.
With this unit, you can make the following settings.
•
Selecting the Pattern and Direction for Wipes (page
II-10)
• Making Detailed Adjustments to Wipe Patterns (page
II-10)
• Adding the Edge to the Wipe Pattern (page II-12)
This section describes wipe effects and basic operations
for wipes.
Wipe settings are made in the [Effect] menu.
For details on the menu item, see “Details on [Effect] Menu” (page II-15).
The [Effect] menu does not appear in 3D mode.
Basic Operations for Wipe
Selecting the Pattern and Direction
for Wipes
A wipe can be set to proceed in either the normal wipe
direction (normal) or reverse wipe direction (reverse). You
can also specify normal and reverse to be switched each
time a transition finishes (normal/reverse).
Selecting the wipe pattern
You can select the wipe pattern using one of the following
three methods.
• Select from the patterns assigned to the numeric buttons
(direct selection).
For details, see “Selecting Effects with the Numeric Keypad (Direct
Selection)” (
c
Basic Operation)
• Enter the pattern number with the numeric buttons.
For details, see “Specifying effects by pattern number” ( c Basic
Operation).
• Specify the pattern number in the [Effect] menu.
Specifying the pattern number in the
[Effect] menu
Settings menu: [Wipe Adjust] (page II-15)
For details on the wipe pattern numbers, see “Effect Pattern List” ( c Basic
Operation).
Making Detailed Adjustments to
Wipe Patterns
You can set the position of a wipe pattern and apply
various variations and modifiers in the [Wipe Modify]
menu.
To display the [Wipe Modify] menu
Display the [Effect] menu, turn the V1 knob to select
[Wipe Adjust], and press this knob.
Tip
Select the video for program output.
r
Select the next video for output.
r
Press the EFF transition type selection button.
r
Set the transition type to [Wipe].
r
Select the pattern and direction for the wipe.
r
Make detailed adjustments to the wipe pattern if necessary.
r
Execute the transition.
Normal
Reverse